Eric,
If the male end is energized when disconnected, it's a hazard!
Kent Osterberg
Blue Mountain Solar, Inc.
Eric Thomas wrote:
I know its a funny title but....why doesn't EnPhase make whips
with male connectors? We are having trouble laying out a system with
multiple sub arrays. We need to cable to sub arrays that are on
different roof planes in order to make up our circuits. From 5 micros
on roof one, into attic, out of SolaDeck on roof two, grab 3 more
micros, back into SolaDeck, into attic for home run. The whip from the
SolDeck to the last 3 micros needs to be male... any suggestions?
EnPhase does not want us to cut an extension that has connectors on
both ends...
Thanks,
Eric Thomas
Solar Epiphany
Seattle
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
|
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
