It took 7 weeks to get my results.
Mike Cook m...@powerupco.com From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Nick Soleil Sent: Thursday, March 31, 2011 11:42 AM To: RE-wrenches Subject: Re: [RE-wrenches] NABCEP Test Hi wrenches: I sat for the NABCEP exam last weekend, and was surprised yesterday to hear that we will not receive the exam results for another month! I had heard that it only took a week. What was your experience. Also, the e-mail yesterday said that the Board has to decide what grade will be a passing grade? Can that be true? Does the grade get set to control the number who pass or fail? That doesn't seem right. Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax: 707-769-9037 _____ From: Hans Frederickson <h...@fredelectric.com> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Thu, March 31, 2011 8:15:19 AM Subject: Re: [RE-wrenches] Expansion joints We used an OZ-Gedney expansion coupling for 1-1/4" EMT on a recent job. The part # is TX-125 for 1-1/4", and it would be TX-150 for 1-1/2". It is the same as the OZ-Gedney AX expansion coupling for rigid conduit, but uses a rigid nipple and EMT connectors to adapt to EMT. The assembly is UL listed. -Hans _____ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Erika Weliczko Sent: Wednesday, March 30, 2011 5:54 PM To: 'RE-wrenches' Subject: Re: [RE-wrenches] Expansion joints I recently used a Hubbell Killark product for rigid/IMC and was not happy with how the threads of the coupling engaged in factory conduit threads. Crousehinds XJG-EMT series is intended for EMT. And is described as being used indoors or outdoors. The EMT couplings mostly seem to be compression. REpower SOLUTIONS www.repowersolutions.com P: 216.268.2275 C: 216.402.4458 From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jamie Johnson Sent: Tuesday, March 29, 2011 2:33 PM To: RE-wrenches Subject: [SPAM] Re: [RE-wrenches] Expansion joints Peter, Cooper makes one for 1.5" emt, not sure if it is rated for wet locations or not. part #XJG54 EMT, it allows for up to 4" max of conduit movement. Jamie Johnson NABCEP Certified PV Technical Sales Professional NABCEP Certified Solar PV Installer General Manager SOLAR POWER ELECTRIC Error! Filename not specified. -------- Original Message -------- Subject: [RE-wrenches] Expansion joints From: "Peter Parrish" <peter.parr...@calsolareng.com <http://peter.parr...@calsolareng.com%3e> >; Date: Tue, March 29, 2011 1:04 pm To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org> Does anyone have information (manu and part number) for expansion joints for 1-1/2 EMT? I have also heard that many EJs are designed for rigid conduit (RMC) and may not be directly applicable to EMT. - Peter Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. 820 Cynthia Ave., Los Angeles, CA 90065 CA Lic. 854779, NABCEP Cert. 031806-26 peter.parr...@calsolareng.com Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885 _______________________________________________
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
