Friends:
First of all, the inverters are PS series, not SW.
Second, I have created a solution: I can acquire a transformer that will
connect a primary across two of the 208 generator phases and create 120/240
off of the secondary. This will imbalance the generator but the genset is
37 kva so the inverter loads are inconsequential.
William
On Thu, Jul 28, 2011 at 12:23 AM, William Miller
<<mailto:will...@millersolar.com>will...@millersolar.com> wrote:
Friends:
Is there any way to connect two SW series inverters to two phases of a
three phase generator? It seems to me that one could connect three SW
inverters with the right stacking cable (or am I confusing Outback
inverters with the hub jumper set properly).
Any input is appreciated.
Thanks,
William
William Miller
Miller Solar
Voice :<tel:805-438-5600>805-438-5600
email: <mailto:will...@millersolar.com>will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1390 / Virus Database: 1518/3793 - Release Date: 07/28/11
William Miller
Miller Solar
Voice :805-438-5600
email: will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
