Normally we run the tank temperature sensor wire behind the cover plate on the electric water heater (like it says to do in the control manufacturer’s instructions). The inspector wants it run through a hole in the tank wall or cover plate with an “approved connector.” Any ideas how to best accomplish this?
http://www.fafcosolar.com/download/519/Tank-Wire.jpg Jason Szumlanski Fafco Solar
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
