If this is a thermister it is a milivolt circuit. Thermostat control wire at 24 VAC does not require this normally. How about a compression cord grip type of TA?
Thanks Dana Orzel - Great Solar Works, Inc - E - d...@solarwork.com - V 970.626.5253 F - 970.626.4140 C - 970.209.4076 web - www.solarwork.com "Responsible Technologies for Responsible People since 1988" P Please consider the environment before printing this email From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jason Szumlanski Sent: Monday, March 26, 2012 1:19 PM To: RE-wrenches Subject: [RE-wrenches] Solar Water Heating, Sensor line to electric water heater Normally we run the tank temperature sensor wire behind the cover plate on the electric water heater (like it says to do in the control manufacturer's instructions). The inspector wants it run through a hole in the tank wall or cover plate with an "approved connector." Any ideas how to best accomplish this? http://www.fafcosolar.com/download/519/Tank-Wire.jpg Jason Szumlanski Fafco Solar
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
