why not just use a well pump pressure switch? todd On Wednesday, April 18, 2012 8:29am, "jay peltz" <j...@asis.com> said:
> HI All, > > I'm looking for a contact pressure gauge with built in switches. > > ( this is an example..http://www.indumart.com/P84.pdf) > > I am looking to turn on/off a hydro with pressure increase/decrease. > > But I just can't seem to find one to buy for anything less than $600. > > SPECs: > switching 24vdc > less than 1 amp. > > Any suggestions? > > thanks, > > jay > > peltz power > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > Sent from Finest Planet WebMail.
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org