Dan,
You may be do this as well, but I frequently deal with homeowners with inexpensive generators, I find that the Outback and Magnum inverters are very tolerant but I do generally have to load the generator up to where I want it bulk charging the batteries, then adjust the generator speed to dial in the freqency to 60Hz using the throttle adj. screw. Do you find the Iota chargers can reach bulk charge voltages, or even EQ voltages ?

    Carl Hansen

On 1/27/2013 5:15 PM, Dan Fink wrote:
We have run into many problems on very remote sites with various really nice, small newer inverter/chargers not accepting waveforms from various newer (inverter-based) generators. For example on one particular system Honda 1000i works fine, Honda 2000i works fine, Honda 3000i and the charger says "no." Plug a different Honda 3000i into the the same inverter/charger, works fine. After sling-loading the Honda there by helicopter. Arrrrrgh! Inverter makers have been very helpful but the settings just can't be tweaked that far, RE Wrenches list gurus have been awesomely helpful, Honda not so helpful but at least honest.

My service calls by helicopter this year will include an O-scope. I really want to get to the bottom of the problem. It plagues us. I like Iota chargers more and more every summer.

--
Dan Fink,
Executive Director;
Otherpower
Buckville Energy Consulting
Buckville Publications LLC
NABCEP / IREC accredited Continuing Education Providers
970.672.4342 (voicemail)




_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to