Hi Carl, thanks and yes, I think its why they only did a 120v version here.
Another question for you there. Its my understanding that neither of your legs is bonded to ground correct? jay peltz power On Feb 3, 2013, at 4:22 PM, Carl Emerson wrote: > Hi Jay, > > Yes you have described our grid waveform correctly. > > It is strange to me that they call yours 240V, the rationale used to describe > yours and mine are different I guess. > > Your grid seems to present less volts and more current. > > If this is correct then I am guessing that the transformers used in the units > here will not work for you. > > Regards > Carl Emerson > > > Hi Carl, > > Your 230vac is a single wave form right? > RMS peak to zero crossing of 230v > > vs our > > 240vac which is 2 phase wave form > RMS peak to zero crossing of 120v > > Have I got this right? > > thanks, > jay > > peltz power > > > > > On Feb 2, 2013, at 6:56 PM, boB wrote: > > > > Carl, NZ is 240 VAC right ? 240 VAC 2 wire ? > > I think that the problem may have to do with leg to leg voltage cross > regulation > imbalance in 120/240 3 wire systems. > > boB > > > On 2/2/2013 3:23 PM, Carl Emerson wrote: >> Goodness knows why 240V Sunny Island’s are unavailable in the US… >> >> We have been installing these in NZ for years !!! >> >> Regards >> Carl Emerson >> >> > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org