Thanks for sharing the screen capture, Marco.

Interesting issues to think about here. This is actually prime clipping season 
in many places (not sure about Hawaii) due to the cool weather. While there are 
more sun-hours in the summer, the cell temperatures are often high enough that 
you won't tend to see rated power out of the modules. 

While I'm not running performance models for work, the people who do are 
routinely increasing dc-to-ac ratios, often as high as 1.4-to-1. Having said 
that, most inverters aren't installed on a roof. (Not yet anyway.) 

I'd probably lean to a more conservative sizing ratio for micros. While I can 
imagine some scenarios where I'd be comfortable with a 215 W micro on a 265 W 
module—like a flat roof install in Vermont, which reportedly doesn't see 1,000 
W/m^2 very often—I wouldn't try that here in Texas.

On Mar 21, 2013, at 7:54 PM, Marco Mangelsdorf wrote:

> Check out the output of the modules below at 1PM on this Spring equinox for 
> this system here in Hilo, Hawaii.
>  
> These mods are SunPower 245s with the Power-One micro 250s.  Notice that the 
> AC outputs below are 223 watts and higher.
>  
> If we had installed Enphase M215s instead, the max output possible would be ~ 
> 224 watts.
>  
> If there’s clipping this early in the year, imagine the degree to which the 
> clipping will be increasing in the months to come as the solar insolation 
> increases.
>  
> And these mods were “only” 245s.  Enphase states that their M215s are fine 
> with modules up to 265 watts!  Imagine the amount of clipping taking place 
> when that kind of pairing takes place.
>  
> marco
>  
> <image005.png>
> <image006.png>
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to