Aaron:
We use a system with slotted PVC conduit. Got the basic idea from a
wrench, don't remember who, but thanks. There are photos on our web
site. Worked on a project today and the system is slowly evolving.
William
At 05:52 PM 4/11/2013, you wrote:
Just wondering what people like to use for supporting the trunk cable for
the enphase 215 inverters. WIth zipties going brittle after a couple of
years aluminum or steel options are what I am more interested in. I have
seen some installs with steel zipties but the sharp edge on them makes me
wonder if there is a chance of them cutting into the cable. I have used
3/8" one hole conduit straps on each side of the trunk cable connector and
although this seems quite stout it gets expensive on larger systems. Any
ideas about products out there for supporting the trunk cable for the life
of the system?
Aaron Mandelkorn
NABCEP Certified PV Installer
Renewable Energy Outfitters
Box 65 Salida, CO. 81201
(970)596-3744
<mailto:reoso...@gmail.com>reoso...@gmail.com
www.reosolar.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 2641/6237 - Release Date: 04/10/13
Miller Solar
Voice :805-438-5600
email: will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
