Rubberized clamps that fit in the rail channel from PV Racking. $75 for 300. Buy from manufacturer.
*Jason Szumlanski** * *Fafco Solar* <http://www.wisestamp.com/apps/wordpress?utm_source=extension&utm_medium=email&utm_term=wordpress&utm_campaign=apps> On Thu, Apr 11, 2013 at 8:52 PM, Aaron Mandelkorn <reoso...@gmail.com>wrote: > Just wondering what people like to use for supporting the trunk cable for > the enphase 215 inverters. WIth zipties going brittle after a couple of > years aluminum or steel options are what I am more interested in. I have > seen some installs with steel zipties but the sharp edge on them makes me > wonder if there is a chance of them cutting into the cable. I have used > 3/8" one hole conduit straps on each side of the trunk cable connector and > although this seems quite stout it gets expensive on larger systems. Any > ideas about products out there for supporting the trunk cable for the life > of the system? > > Aaron Mandelkorn > NABCEP Certified PV Installer > Renewable Energy Outfitters > Box 65 Salida, CO. 81201 > (970)596-3744 > reoso...@gmail.com > www.reosolar.com > > > > > > > > > > > > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org