|
wrenches, i have a customer who purchased 20 used astropower ap75 modules. they are frameless and appear to have been previously mounted using four, 2" wide X 10" long strips of blue rigid foam, glued to the back of each module with some kind of adhesive. two questions: this seems to be a reasonable mounting system id like to repeat. would anyone familiar with this kind of mounting technique be willing to comment/speculate on an adhesive that would not degrade the tedlar backsheet? whatever was previously used worked great. what kind of flat/smooth mounting surface would folks suggest the other side of the blue foam be attached to? the only thing i can think of is plywood, but that would rot over time. thanks, todd |
_______________________________________________ List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
