Mac, I'm not much of a poster, but there is another answer. Although I largely agree with the answers you've gotten, as far as they go, but I use a boost M PPT controller from http://genasun.com to trickle charge my 36 V Elek track from a pair of Arco modules. It's not adjustable but is marine grade. It wasn't cheap, I had to buy it retail. But it's been doing the job for several years. The company responded to my questions saying this controller is specifically made to charge 24 V,36V,and 48V batteries from a single grid tie module. Lance
On Jun 4, 2013, at 8:04 AM, Mac Lewis <maclew...@gmail.com> wrote: > Hello wrenches, > > Is there a good method to charge 24V battery bank with single 60 cell > modules? Ideally, I'd like to charge a 24 V bank with a Kyocera 245GX-LFB. > However, at NOTC the Vmp is 26.8V. Any good way to do this? > > Thanks in advance. > -- > > > > Mac Lewis > > "Yo solo sé que no sé nada." -Sócrates > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
