Re: [RE-wrenches] Trace 2548 intermittent power problem...55 not 25

[Allan Sindelar]

Eric, Ray's suggestion to check the gennie is easy - disconnect the generator's output to the inverter (probably not necessary, but helps to isolate symptoms) and start the generator manually at the gennie. If it shuts down, it's the gennie. Allan On 10/17/2013 12:27 PM, SunHarvest wrote: I was looking at a scratch pad note where I wrote 25 instead of 55...Yes, it is a SW5548. Definitely not set to "Search"...it's in "On" mode. I've checked error codes. No "Yes" messages. I am wondering about a firmware upgrade although I have serious doubt that will clear up the problem.   I guess I will try the swap and see if that does the trick.   On the genny, I try to stay away from genset service but I can definitely check some of the more simple items like check oil & coolant.   Thanks guys.

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org