Solar World Sun Clips are what I would use. Jay Peltz power.
> On May 24, 2017, at 6:28 AM, AE Solar <autonomousenerg...@gmail.com> wrote: > > With Solarworld/SnapNRack we run wires in the rail and use clips on the long > edge of the frame when needed. SnapNRack has a clip that fits in the upper > rail groove to hold wires down into it. The snap n rack part you are > referencing (I think they call it 'box frame adapter') is good if you want to > attach squirrel netting to the short edge of the panels, but it's bulky and > expensive. I don't think it will do much for attaching wire clips. > Adam > >> On Wed, May 24, 2017 at 8:11 AM Dana <d...@solarwork.com> wrote: >> I am installing SolarWorld 285 w modules for our new home on Array >> Technologies dual axis trackers [we are in a canyon]. >> >> The side rails of the frames are typical with a flange however the short end >> frame is this little kind of “I” beam that does not allow for any wire clips. >> >> I am wondering what other folks have done in this situation, short of >> drilling the module frame? >> >> SnapnRack has a ¾” thick clamp that creates a 7/8” min gap between the >> module columns that is rather unsightly. >> >> Suggestions? >> >> >> >> ---------------------------------------------------------------------------- >> >> Dana Orzel Great Solar Works, Inc. >> >> 208.721.7003 d...@solarwork.com >> >> Idaho Contractor - # 028765 Idaho PV # 028374 >> >> NABCEP # 051112-136 www.solarwork.biz >> >> "Responsible Technologies for Responsible People since 1988" >> >> P Please consider the environment before printing this email. >> >> >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> > > -- > Adam Katzman > Autonomous Energies > PO Box 1245 > Kingston, NY 12402 > www.autonomousenergies.com > (518) 567-1468 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
