I used a clip from Iron Ridge check with them On Wed, Apr 18, 2018, 11:00 AM Dana <d...@solarwork.com> wrote:
> Good Morning Wrenches, > > > > I am required to keep the bare #6 copper from touching the aluminum frame > work of a Array Technologies tracker where it is not mechanically connected > by a pass-through ground clamp on a tracking array [dissimilar metals] and > am looking for a lead on an insulated standoff or strap to hold the #6 bare > copper as it passes from panel to panel and rail to rail. The plans > examiner would accept pass through clamps & this is a worst case-spendy > solution to this. > > > > I have searched the inquired at local electrical warehouse &on the > internet and to no avail under “insulated strap” & “insulated cable > standoff”. > > > > Has anyone else encountered his & what did you use? Where did you source > this strap? > > > > I remember seeing something like this in the fuzzy past & cannot recall > where I saw it or what it was for. > > > > Thanks for any suggestions. > > > > > ---------------------------------------------------------------------------- > > Dana Orzel Great Solar Works, Inc. > > *C - 208.721.7003 d...@solarwork.com > <d...@solarwork.com>* > > Idaho Contractor - # 028765 Idaho PV # 028374 > > NABCEP # 051112-136 www.solarwork.biz > > *"Responsible Technologies for Responsible People since 1988" * > > *P* Please consider the environment before printing this email. > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org