I'll x2 what Ray says....unless it specifies AC or DC then the voltage rating 
applies to either. 

Benn Kilburn
SkyFire Energy
780-906-7807

> On Jun 2, 2018, at 11:10 AM, Ray <r...@solarray.com> wrote:
> 
> I pulled up the Ilsco site.  They are rated to 600 volts.  That voltage is AC 
> and DC, unless it specifically says AC only.  We've used them for decades 
> with DC.  Check your voltage rating for THHN cable: it does not say DC 
> either.  
> Ilsco is also one of the few manufacturers to make flex cable rated 
> connectors.  They have blue caps.  This is what we should be using when using 
> higher strand count cables like Cobra X Flex.
> 
> Ray Walters
> Remote Solar
> 303 505-8760
>> On 6/2/18 8:18 AM, Darryl Thayer wrote:
>> I have heard AC DC no difference.  However, I have experienced failure of 
>> these connectors via insulation softening in J boxes on the roof.  The 
>> plastic is not thermal set and it will distort if pressured against the side 
>> of the box.  This has never been a problem for interior wiring only in the 
>> solar case outside.    
>> 
>>> On Fri, Jun 1, 2018 at 4:50 PM, James Rudolph <jamesrudolp...@gmail.com> 
>>> wrote:
>>> Aloha Wrenches,
>>> Does anyone know if Ilsco Insulated Tap Connectors at DC rated?
>>> I looked on their cut sheet, and even called the Cincinnati and I was not 
>>> able to confirm this?
>>> 
>>> Does anybody know this, or have a better connector to use?
>>> 
>>> Mahalo in advance,
>>> 
>>> James B. Rudolph
>>> Hawaii Unifed
>>> Director of  Energy
>>> ES Electrician # 10816
>>> NABCEP Certified PV Installer # 091209-155
>>> 808.594.9969
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: RE-wrenches@lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: 
>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>> 
>>> 
>> 
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to