Wrenches With Eguage you can set up any screen you want from speed to fixed max levels. Be aware that the DC CT's are directional and may report reversed but the values are incorrect. Jerry
On Fri, Jan 24, 2020, 10:23 AM Howie Michaelson <howie.michael...@gmail.com> wrote: > Hi Chris, > Thanks for the info and ideas. So far the eGauge makes more sense because > it can monitor DC loads as well as AC. When you set up a tablet for a > client, are you able to set up a standard layout for basic info to be > displayed? The eGauge has a lot of info and flexibility, which is great, > but it is not the most intuitive interface. Often there can be too much > info and complexity for the end user to sort through easily. > Howie > > Howie Michaelson > Sun Catcher > NABCEP Certified Solar PV Installer™ > Solar Electric & Heat Pumps Systems Sales & Service > 802-272-0004 > > > > On Fri, Jan 24, 2020, 8:03 AM Chris Sparadeo <sparadeo.ch...@gmail.com> > wrote: > >> Hi Howie, >> >> Neurio makes a $200-ish product very comparable to the egauge. This also >> happens to be the meter used on the Powerwall 2. >> >> https://www.neur.io/energy-monitor/ >> >> My understanding is that it has a limited amount of CT inputs, but for >> monitoring a handful of circuits/sources this should work fine. >> >> I hear your complaint about the egauge not having a great user interface >> on the device. What I have done to combate this in the past has been to buy >> a cheap tablet (the Amazon fire goes for around $50) and install it >> co-located with the egauge so that info is readily available and the >> homeowner can get meaningful data at the device without having to be tech >> savvy. >> >> Best, >> >> Chris >> >> On Thu, Jan 23, 2020 at 11:27 PM Jerry Shafer <jerrysgarag...@gmail.com> >> wrote: >> >>> Wrenches, Howie >>> Egauge is a great product with both AC and DC CT's from very small to >>> over 2500 amps, you can order what ever you need that fits your >>> application, I have used several DC CT's for the purpose of testing >>> extended use of new products, the website is included and field >>> programmable and can be re-set from application to application or as >>> demands change. >>> Jerry >>> NABCEP PV Inspector >>> >>> On Thu, Jan 23, 2020 at 11:16 AM Howie Michaelson < >>> howie.michael...@gmail.com> wrote: >>> >>>> Hi All, >>>> I am looking for a good choice for a meter that I can use for the >>>> following circumstances: >>>> >>>> - Legacy Off-grid and Battery Backup systems that don't have very >>>> useful on board metering in order to get an accurate reading of loads, >>>> generation (solar, wind, generator, etc.), power in from and out to the >>>> grid >>>> - Potential new battery based installs where the above info is not >>>> easily ascertainable >>>> - Troubleshooting systems where there are apparent discrepancies >>>> between client expectations/understanding and actual circumstances >>>> - Metering of both AC and DC loads and generation >>>> - Metering capable of Internet connection for remote monitoring and >>>> data collection >>>> - Potential for leaving in/selling to client if they are interested >>>> in the info long term >>>> >>>> My goto meter in the past has been the Trimetric, but that doesn't give >>>> me enough data for real troubleshooting and data collection. I have for >>>> years run into circumstances where this information gathered over a period >>>> of time would be incredibly useful. Being able to see info remotely and >>>> looking at history would be even more useful. Having started using Blue >>>> Ion batteries that have incorporated an eGauge in their system, I have >>>> become familiar with some of the eGauge capabilities. I can see how having >>>> one on my service truck with multiple AC and DC CTs that I can leave on >>>> site for a period time would often be very useful, although a bit >>>> complicated to set up for short term analysis. I also don't know that it >>>> has a local display for those not computer savvy. And it is a bit pricey >>>> for simple systems that I'd could potentially sell to the client once they >>>> get an idea of how helpful it could be. >>>> >>>> What have folks used with what degree of success? I'm open to all >>>> suggestions and ideas/critiques. >>>> Thanks, >>>> Howie >>>> >>>> *Howie Michaelson **Sun Catcher* >>>> >>>> *NABCEP Certified Solar PV Installer™ * >>>> >>>> *Solar Electric Systems Sales & Service 802-272-0004* >>>> _______________________________________________ >>>> List sponsored by Redwood Alliance >>>> >>>> List Address: RE-wrenches@lists.re-wrenches.org >>>> >>>> Change listserver email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> List-Archive: >>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>>> >>>> List rules & etiquette: >>>> www.re-wrenches.org/etiquette.htm >>>> >>>> Check out or update participant bios: >>>> www.members.re-wrenches.org >>>> >>>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >>> >>> -- >> Chris Sparadeo >> >> >> C_802-369-4458 >> H_802-728-3059 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
