We’ve moved the whole thing using a pallet jack. Low center of gravity, nothing 
is hanging, no disassembly. But it assumes that the cases were placed on blocks 
originally so you can get the jack under them. Also helps if it's on a slab or 
a very sturdy wooden floor. We get them outside and hire a local firewood guy 
with a hoist on his truck to load them and take them away or transfer them to 
the recycler's truck. 


Bruce Erickson
Mendocino Solar Service
707-937-1701
707-937-1741 fax
PO Box 1252
Mendocino, CA 95460
 


"Serving the Solar System"





> On Jul 23, 2020, at 4:12 PM, Glenn Burt <glenn.b...@glbcc.com> wrote:
> 
> I have also seen automotive engine hoists reversed and with ballast, used to 
> grunt very heavy batteries.
>  
> From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org 
> <mailto:re-wrenches-boun...@lists.re-wrenches.org>> On Behalf Of Jason 
> Szumlanski
> Sent: Thursday, July 23, 2020 6:22 PM
> To: RE-wrenches <re-wrenches@lists.re-wrenches.org 
> <mailto:re-wrenches@lists.re-wrenches.org>>
> Subject: Re: [RE-wrenches] Two Dilemmas
>  
> Chain hoist and muscle for the move. It's not easy. It can be hard to get 
> them out of the steel case. Slow and careful... I haven't done this a lot, 
> but the few times it was a dicey proposition.
>  
> Jason Szumlanski
>  
>  
>  
> On Thu, Jul 23, 2020 at 5:47 PM Rick Brown 
> <r...@solshineenergyalternatives.com 
> <mailto:r...@solshineenergyalternatives.com>> wrote:
>> Wrenches,
>>  
>> Dilemma #1:
>>  
>> I’ve had to replace 4 sets of Solar One batteries (see pic). Each set weighs 
>> in excess of 1000lbs. How have you all transported these? The originals were 
>> placed into service prior to the room’s walls and roof going up. 
>>  
>> <image001.jpg>
>>  
>> Dilemma #2:
>>  
>> The above system is comprised of a Trace SW5548 along with two Outback 
>> FM60s. After reprogramming the CCs and inverter with new charging 
>> parameters, I can’t get the Trace to export excess production once the 
>> batteries are charged. I do have the inverter set to “Sell” mode What am I 
>> missing? I have had little experience with the Trace line. 
>>  
>> Thanks,
>> 
>> rick brown
>> SolShine Energy Alternatives, LLC
>> Electrical & Solar Contracting Services
>> www.SolShineEnergyAlternatives.com 
>> <https://mailtrack.io/trace/link/cd6490343ec8bea89108ca98f415d0f333006459?url=http%3A%2F%2Fwww.SolShineEnergyAlternatives.com&userId=1613865&signature=0f9b54a9d3333480>
>> Check, Virginia 24072
>> 540.808.9502 <tel:540.808.9502>
>> 
>> VA Class A Contractor Lic# 2705147660
>> VA Master Electrician Lic# 2710062762
>> VA Alternative Energy Systems Installer  
>> NABCEP Certified PV Installation Professional 110112-21
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org 
>> <mailto:RE-wrenches@lists.re-wrenches.org>
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
>> <https://mailtrack.io/trace/link/8283b3c2eae7cf88321c40aa81d0e77530c50622?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bc93512b53de863>
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org 
>> <https://mailtrack.io/trace/link/c98f0893a03c9b7b149fb7449d75db66d820f42b?url=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bad164b4080c809>
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm 
>> <https://mailtrack.io/trace/link/49811a402fb2d33d4c6705a3e43f1a76d4c89e54?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=47b77b3e44bfd621>
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org 
>> <https://mailtrack.io/trace/link/926642e33c982c7ad3b3048307cc82c2592f8469?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=12b81d92c48f4367>
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org 
> <mailto:RE-wrenches@lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org 
> <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to