Your missing the small writing on the black display bezel on the inverter….. “Hal 9000", “sorry Rick I can’t allow you to do that”. Your batteries, Have you removed or would like to know how to remove individual cells or are you trying to move the whole tray? If you want to call my cell # Ill be more then happy to offer my suggestions. I always try to use the larger cells so I have moved quite a few, and replaced quite a few cells too. OR are you looking to find other options. The old SW 5548 was it working before you got there? depending on the year had a "grid inter tie box” . Are you expecting to see it sell after turning the unit on? Shorten up the Absorb time to 0, lower the sell voltage to below what the batteries are reading then see if it connects. remember it too has a grid lock out time if the “grid internee box is installed. 300secs i believe. The sell mode was not to smooth w/ the “grid box” it would fluctuate from 1amp to what the highest sell current setting, back n forth.
> On Jul 23, 2020, at 6:27 PM, Chris Sparadeo <sparadeo.ch...@gmail.com> wrote: > > Dilemma #2 > > <IMG_1642.jpg> > > > On Thu, Jul 23, 2020 at 6:22 PM Jason Szumlanski > <ja...@floridasolardesigngroup.com > <mailto:ja...@floridasolardesigngroup.com>> wrote: > Chain hoist and muscle for the move. It's not easy. It can be hard to get > them out of the steel case. Slow and careful... I haven't done this a lot, > but the few times it was a dicey proposition. > > Jason Szumlanski > > > > On Thu, Jul 23, 2020 at 5:47 PM Rick Brown > <r...@solshineenergyalternatives.com > <mailto:r...@solshineenergyalternatives.com>> wrote: > Wrenches, > > Dilemma #1: > > I’ve had to replace 4 sets of Solar One batteries (see pic). Each set weighs > in excess of 1000lbs. How have you all transported these? The originals were > placed into service prior to the room’s walls and roof going up. > > <image0.jpeg> > > Dilemma #2: > > The above system is comprised of a Trace SW5548 along with two Outback FM60s. > After reprogramming the CCs and inverter with new charging parameters, I > can’t get the Trace to export excess production once the batteries are > charged. I do have the inverter set to “Sell” mode What am I missing? I have > had little experience with the Trace line. > > Thanks, > > rick brown > SolShine Energy Alternatives, LLC > Electrical & Solar Contracting Services > www.SolShineEnergyAlternatives.com > <https://mailtrack.io/trace/link/cd6490343ec8bea89108ca98f415d0f333006459?url=http%3A%2F%2Fwww.SolShineEnergyAlternatives.com&userId=1613865&signature=0f9b54a9d3333480> > Check, Virginia 24072 > 540.808.9502 <tel:540.808.9502> > > VA Class A Contractor Lic# 2705147660 > VA Master Electrician Lic# 2710062762 > VA Alternative Energy Systems Installer > NABCEP Certified PV Installation Professional 110112-21 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <https://mailtrack.io/trace/link/8283b3c2eae7cf88321c40aa81d0e77530c50622?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bc93512b53de863> > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <https://mailtrack.io/trace/link/c98f0893a03c9b7b149fb7449d75db66d820f42b?url=http%3A%2F%2Flists.re-wrenches.org%2Fpipermail%2Fre-wrenches-re-wrenches.org&userId=1613865&signature=8bad164b4080c809> > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > <https://mailtrack.io/trace/link/49811a402fb2d33d4c6705a3e43f1a76d4c89e54?url=http%3A%2F%2Fwww.re-wrenches.org%2Fetiquette.htm&userId=1613865&signature=47b77b3e44bfd621> > > Check out or update participant bios: > www.members.re-wrenches.org > <https://mailtrack.io/trace/link/926642e33c982c7ad3b3048307cc82c2592f8469?url=http%3A%2F%2Fwww.members.re-wrenches.org&userId=1613865&signature=12b81d92c48f4367> > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > www.members.re-wrenches.org <http://www.members.re-wrenches.org/> > > -- > Chris Sparadeo > > > C_802-369-4458 > H_802-728-3059 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > t...@swnl.net > <blocked::mailto:t...@swnl.net%22%20%5Co%20%22blocked::mailto:t...@swnl.net> > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
