It was an installed price with pump set at 100' - 3 years ago. I had the 
wire....



Dana Orzel                              Great Solar Works, Inc. 
C - 208.721.7003                       d...@solarwork.com
Idaho Contractor - # 028765         Idaho PV # 028374
NABCEP # 051112-136                       www.solarwork.com
"Responsible Technologies for Responsible People since 1988"  
 Please consider the environment before printing this email.


-----Original Message-----
From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Jay
Sent: Wednesday, September 23, 2020 9:25 AM
To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Pentair Pump power

Hi Dana

What did it cost? Just the parts. 

Thx
Jay

> On Sep 23, 2020, at 8:31 AM, Dana Orzel <d...@solarwork.com> wrote:
> 
> 3 years in service now & no service required or needed. I installed a large 
> -120 gallon well expansion tank as usual [Typ off grid thinking -- reduce the 
> # of start surge] & found out it was not necessary. The start up is so 
> tapered smooth that I could have used a 40 gal tank, when I spec another OG 
> system I will not use an oversized storage tank. Ghost load on the controller 
> [super smart, digital & always awake] is very slight. The controller uses a 
> transducer not a pressure switch measures PSI in tenths of a PSI.  I have not 
> tried to measure the controller load asleep, as it is hard wired in.
> 
> 
> 
> Dana Orzel                              Great Solar Works, Inc. 
> C - 208.721.7003                       d...@solarwork.com
> Idaho Contractor - # 028765         Idaho PV # 028374
> NABCEP # 051112-136                       www.solarwork.com
> "Responsible Technologies for Responsible People since 1988"  
>  Please consider the environment before printing this email.
> 
> 
> -----Original Message-----
> From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On 
> Behalf Of frenergy
> Sent: Tuesday, September 22, 2020 7:18 PM
> To: re-wrenches@lists.re-wrenches.org
> Subject: Re: [RE-wrenches] Pentair Pump power
> 
> Just curious, the 120VAC 1/2 HP submersible that has to date been in the well 
> for the last 17 years has needed zero service, is there something about the 
> Pentair set-up you're referring to that needs regular or occasional service?  
> Believe me I understand your comment about schlepping service to some other 
> poor soul, but....
> 
> Is the Pentair powered with 240 Vac inverter power?
> 
> Bill
> 
>> On 9/22/2020 2:58 PM, Dana Orzel wrote:
>> If you have 240 VAC look at the Pentair wild AC pumps I have one at 20 GPM 
>> and am a believer. Tapers on - soft start, varies the volts & amperage with 
>> flow and tapers the amperage down as it reaches a full expansion tank.
>> 
>> Even better my local well pump installer sells & services it so I do not 
>> have to! Getting a little smarter as I get older.
>> 
>> 
>> 
>> Dana Orzel                              Great Solar Works, Inc.
>> C - 208.721.7003                       d...@solarwork.com
>> Idaho Contractor - # 028765         Idaho PV # 028374
>> NABCEP # 051112-136                       www.solarwork.com
>> "Responsible Technologies for Responsible People since 1988"
>>  Please consider the environment before printing this email.
>> 
>> 
>> -----Original Message-----
>> From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On 
>> Behalf Of frenergy
>> Sent: Tuesday, September 22, 2020 1:12 PM
>> To: re-wrenches@lists.re-wrenches.org
>> Subject: [RE-wrenches] Pump power
>> 
>> Wrenchers,
>> 
>>              We're upgrading an off-grid water system.  Dynamic head 
>> while pumping at 20 GPM is 150 ft from water level to wellhead and 
>> then its 85 ft vertical to storage tank so 235 ft total head to open 
>> discharge.  We would like to get most of that 20 GPM, we need to know 
>> if there is personal experience with starting a 1.5 or 2 HP, 240 vac,
>> 2 wire submersible pump against that kind of head with an Outback 
>> Flex
>> Power2 (2 X VFXR3648A-01 inverters).
>> 
>>              The FP2 will also be powering standard off-grid loads. There is 
>> plenty of battery behind the inverters.  If a soft-start solution is 
>> required, some specifics would be great. Grundfos doesn't seem to have an 
>> option for these requirements, solar-direct is not an option at this 
>> location.
>> 
>> Thanks,
>> 
>> Bill
>> 
>> Feather River Solar Electric
>> Bill Battagin, Owner
>> 4291 Nelson St.
>> Taylorsville, CA 95983
>> 530.284.7849
>> CA Lic 874049
>> www.frenergy.net
>> 
>> 
>> --
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> --
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net
> 
> 
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to