Hi Jeremy, I’ve not run into that issue but you could put more bolts at different locations for different tilts.
A template would keep them the correct spacing. Wouldn’t slide but would be adjustable. I don’t know if you’ve tried heat but it’s pretty amazing at getting things loosened up. The other way is cold, using a spray can for computers for example. Or using the combo. Damn it’s just a stupid rack, should be easy. Jay Peltz power. > On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez <allsolarjer...@msn.com> wrote: > > Does anyone have any trick to adjusting the tilt angle of the TPM4 pole > mounts? These are the racks with the aluminum beam (strongback) with slots > for the bolts. > We have tried anti seize, and cutting the heads of the bolts square in > attempts to help with adjustment. > Help! > > > Jeremy Rodriguez > Solar Installation / Design Expert > All Solar, Inc. > 1463 M St > Penrose Colorado 81240 > > Sent by Jeremy's iPhone. Sorry for typos and shorthand. > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org