Chris... I'm intrigued by the custom adjusters from MT. What about the issue of loosening and retorqueing the 350 ftlb main pivot bolt?
On Thu, Oct 15, 2020, 1:50 PM Chris Schaefer <ch...@solarandwindfx.com> wrote: > I'd suggest reaching out to Travis at MT Solar as he has made custom > manual adjusters for my old installed DPW pole mounts. No bolts to remove > and easy for anyone to adjust the angle without the need of a ladder. > > Christopher > > On Thu, Oct 15, 2020 at 10:25 AM Jay <jay.pe...@gmail.com> wrote: > >> Hi Jeremy, >> >> I’ve not run into that issue but you could put more bolts at different >> locations for different tilts. >> >> A template would keep them the correct spacing. >> >> Wouldn’t slide but would be adjustable. >> >> I don’t know if you’ve tried heat but it’s pretty amazing at getting >> things loosened up. >> The other way is cold, using a spray can for computers for example. >> Or using the combo. >> >> Damn it’s just a stupid rack, should be easy. >> >> Jay >> >> Peltz power. >> >> >> >> On Oct 15, 2020, at 7:52 AM, Jeremy Rodriguez <allsolarjer...@msn.com> >> wrote: >> >> Does anyone have any trick to adjusting the tilt angle of the TPM4 pole >> mounts? These are the racks with the aluminum beam (strongback) with slots >> for the bolts. >> We have tried anti seize, and cutting the heads of the bolts square in >> attempts to help with adjustment. >> Help! >> >> >> Jeremy Rodriguez >> Solar Installation / Design Expert >> All Solar, Inc. >> 1463 M St >> Penrose Colorado 81240 >> >> Sent by Jeremy's iPhone. Sorry for typos and shorthand. >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> > > -- > > Chris Schaefer’s > <http:www.solarandwindfx.com> > > *Tel/Fax 585-229-2083 or Cell 585-748-1870 * > *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com > <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com > <ch...@solarandwindfx.com>* > > > Thomas Jefferson, the author of our great Constitution, once said, > "democracy" will cease to exist when you take away from those who are > willing to work and give to those who would not." > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
