HI Jon, Can you tell us how long the system has been operational? Trying to figure out if this is a new system or an older.
And what size generator do you have? If its an older system and with a big generator/big loads then there is a possibility of damaged/sticky relays. jay peltz power > On Dec 14, 2020, at 9:07 AM, Tuss, Lones <lt...@outbackpower.com> wrote: > > Hi Jon > Not much to go on here the suggestion to look for damaged relays is probably > a good idea. > Look to see if there is signs of arcing or the relay covers have a smokey > appearance. > You stated the system has worked for the last week and the AGS has gone > through several start stop sequences and the system error has not repeated. > It might be interesting to see if there were any warning in the event log > perhaps that would give more clues. > It is difficult to be certain when the system is currently functioning. > Sorry that is all I have. > Take Care Sir > > > From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org > <mailto:re-wrenches-boun...@lists.re-wrenches.org>> On Behalf Of Jon > Siegenthaler > Sent: Friday, December 11, 2020 6:01 PM > To: re-wrenches@lists.re-wrenches.org > <mailto:re-wrenches@lists.re-wrenches.org> > Subject: [RE-wrenches] Outback AC Backfeed Error > > Hey wrenches, > > I have a client who has a couple of the Radian 8048's and has an error code > of "AC Backfeed Error GS-1". Looking at the manual it states that "Usually > indicates another AC power source (out of phase with the inverter) was > connected to the unit’s AC output. Can also occur if an out-of-phase AC > source is connected to the inverter’s AC input." > > However when this happened the generator wasn't running and it's an off grid > system. Is there a way that the master is looking to the slave as another > power source? The system had been running fine this week, auto running the > generator early morning and shutting down on its own. > > Anyone seen something like this before? Thanks, > > Jon Siegenthaler > > > This email and any attachments may contain confidential information that is > intended only for the recipient(s). If you have received this email in error, > please notify the sender and delete it from your system. Any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of the company or its affiliates. This email does > not constitute an agreement to conduct transactions by electronic means and > does not create any legally binding contract or enforceable obligation in the > absence of a fully signed written contract. The recipient should check this > email and any attachments for viruses. The company accepts no liability for > any loss or damage caused by software viruses. If you are the intended > recipient and you do not wish to receive similar email(s) from us in the > future then please notify the sender. Please consider the environment before > printing._______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/> > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/> >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
