Wrenches, Kirpal I use the grid connection in the mate, grid use, and set the inverter to connect only at that time, its far from. Ideal but seems to do the job. I have tried the HBX but its inverse to what l wanted it to do, we are fortunate to have a Outback guy on this forum and he may chime in also Jerry
On Thu, Feb 4, 2021, 8:22 AM Kirpal <solarwo...@gmail.com> wrote: > Hi Folks.... > We have a scenario where we would like to control when our system sells > power back to the grid. Basically, we only want to sell back while the sun > is shining. We would like to stop selling based on programmed clock > settings. I know in HBX mode we can control when we buy from the grid, > wondering if anyone knows how to control if and when we sell to the grid, > separate from voltage set points. In this situation we basically don't > want to sell hydro power back at night. > We can create our own relay controls to prevent if we need to, but hoping > someone has a Mate controller based programming solution. I can't seem to > find it and at first glance Outback tech support didn't have an answer...It > was a new tech support guy I spoke with and he was going to do some > research and get back to me. > 100 Thanks! > > Sunny Regards, > Kirpal Khalsa > Oregon LRT#25 > Oregon Solarworks LLC > www.oregonsolarworks.com > 541-299-0402 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org