I've done 3phase with 6 Schneider Conext XW. It worked well but when you convert to 3-phase you lose surge capacity because you are turning the inverters into 120V inverters from 240.
*Eric Smiley,* Project Manager e...@vecoop.ca T: 250.703.6004 <+12507036004> T: 888.386.0116 <+18883860116> *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* * <https://viridianenergy.ca/>* On Tue, 20 Apr 2021 at 17:45, Darryl Thayer <darylsol...@gmail.com> wrote: > Hello all, When I have done a small 3-phase I have used Outback GVFX > 3548 up to 32 kW (120/208) my largest was about 45 kW it worked for 12 > years, then was replaced when the owner wanted to go larger. I made a > 3-phase design using Solark but SolArk did not understand 3-phase and could > not answer in English my questions. (So I did not submit) However, they > assumed their equipment could go to about 50 kW when combined into 9 > units. > > On Tue, Apr 20, 2021 at 5:15 PM Chris Schaefer <ch...@solarandwindfx.com> > wrote: > >> G'day All, >> >> I'm not familiar with any 3 ph 208 to 480vac battery backup inverter >> manufacturers. So if you could point me in the right direction on who you >> know and better yet who you've had experience with, good, bad or otherwise, >> that would be extremely helpful. >> >> Happy 420 to all my fellow Solar Bozo's, >> Christopher- >> >> Chris Schaefer’s >> <http:www.solarandwindfx.com> >> >> *Tel/Fax 585-229-2083 or Cell 585-748-1870 * >> *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com >> <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com >> <ch...@solarandwindfx.com>* >> >> >> Thomas Jefferson, the author of our great Constitution, once said, >> "democracy" will cease to exist when you take away from those who are >> willing to work and give to those who would not." >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
