Actually I’m using the 12V relay to activate a battery vent fan. For generator starting, I’m using the dry contact relay for two-wire start. I have the circuit protected by a 2amp fast acting fuse. Fuse is good.
> On Sep 14, 2021, at 11:10 AM, Tuss, Lones <lones.t...@enersys.com> wrote: > > Hi Michael > It sound like you are using the 12 volt aux out on the radian to activate a > separate relay. > If so disconnect the relay then check and see if the 12 aux attempts to go > high (12v dc). > If it does it may be a relay issue. > The Radian does have an on board relay you could use that instead of a > discrete relay. > In AGS on the Mate3(s) just select Relay. > I hope this helps sir. > Take Care > > > > From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org > <mailto:re-wrenches-boun...@lists.re-wrenches.org>> On Behalf Of Michael > Morningstar > Sent: Tuesday, September 14, 2021 10:55 AM > To: RE-wrenches <re-wrenches@lists.re-wrenches.org > <mailto:re-wrenches@lists.re-wrenches.org>> > Subject: [RE-wrenches] Radian Generator Relay > > CAUTION: This email originated from outside of the Company. Do not click > links or open attachments unless you recognize the sender and know the > content is safe. > > > Wrenches, > > I’ve got a Radian 8048/Mate 3S that no longer is activating the relay > responsible for generator starting. I’ve power cycled everything and updated > firmware. When I attempt to start the generator via the Mate 3S, the relay > does not close. > > Any suggestions before I look into replacing the relay/board? > > Which board do I order and what is the best source? > > Many thanks, > Michael > > > > > > Michael Morningstar > > > Morningstar Electric > PO Box 1494 > Mount Shasta, California 96067 > 530-921-0560 > CSLB 949635 > > <image001.gif> > > > > This email and any attachments may contain confidential information that is > intended only for the recipient(s). If you have received this email in error, > please notify the sender and delete it from your system. Any views or > opinions presented in this email are solely those of the author and do not > necessarily represent those of the company or its affiliates. This email does > not constitute an agreement to conduct transactions by electronic means and > does not create any legally binding contract or enforceable obligation in the > absence of a fully signed written contract. The recipient should check this > email and any attachments for viruses. The company accepts no liability for > any loss or damage caused by software viruses. If you are the intended > recipient and you do not wish to receive similar email(s) from us in the > future then please notify the sender. Please consider the environment before > printing. _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > <http://re-wrenches.org/> > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/> > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/> Michael Morningstar Morningstar Electric PO Box 1494 Mount Shasta, California 96067 530-921-0560 CSLB 949635
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org