Jay I am confused as usual, what are the loads? AC or DC? How are you charging the battery from the generator or how is the battery powering the loads? What is the desired current or the size of the generator? sorry if this I dumb question
On Wed, Dec 1, 2021 at 2:23 PM Jay <jay.pe...@gmail.com> wrote: > I got a call from a colleague that is designing a very large roughly > 90-100 kWh lithium battery at 48v. > > He’s looking for large AC chargers to charge this bank. The reason is > total elimination of switch over delay from inverter to generator and back. > > One technique is to use inverters for this, but pretty pricey. > > Any recommendations as to equipment, brands etc? > > It would be a 208 3 phase AC side powered by a generator. > > Thx > Jay > > Peltz power. > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
