Good Morning Wrenches, I have an Outback Radian 8048 site that is acting up.
This only happens when the generator is automatically started. It will start the generator and warm it up normally and then connect and start charging as it should. After about 30 seconds to 1 minute it will drop the AC input, and put the generator in cool down mode and the charger will be disabled. It will then continue to run the generator until you turn it off manually, presumably because it hasn't reached the stop trigger. This system will charge normally when the generator is manually started. The firmware on the Mate3s is up to date. Any ideas? Thanks in advance -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
