I like Sunbundlers too, but you have to be careful - I’ve seen them pulled too 
tight to the point where the crimp is digging into conductor insulation, 
especially when the weight of the wire is on the crimp. 

Brian

> On Mar 14, 2022, at 10:43 AM, August Goers <aug...@luminalt.com> wrote:
> 
> 
> I'm partial to Heyco Sunbundlers which are PVC coated stainless cable ties:
> 
> https://www.heyco.com/Solar_Power_Components/product.cfm?product=Sunbundler-Cable-Ties
> 
> We try to do the majority of our wire management with stainless S-clips 
> mounted on module frames or rail mounted C-shaped clips. Cable ties are used 
> sparingly for final runs into J-boxes etc. 
> 
> I don't know how much better the good quality plastic ties are (made by the 
> likes of HellermannTyton or Panuit) compared to lower cost hardware store 
> varieties. We've found regular Home Depot type plastic cable ties last about 
> 10 to 15 years under modules in the Bay Area.
> 
> August
> Luminalt
> 
> 
>> On Mon, Mar 14, 2022 at 9:29 AM Maverick Brown <maver...@mavericksolar.com> 
>> wrote:
>> We’ve had great luck with the Thomas & Betts Ty-Rap brand UV resistant nylon 
>> with stainless steel locking tab. 11” and 14” are handy. 
>> 
>> Also, for highly exposed areas , the Commercial Electric 11” Stainless Steel 
>> cable tie works wonders. 
>> 
>> For wire management along rails of bundled PV cable, we use one-hole 1/2” 
>> and 3/4” EMT pipe straps with self tapping screws to keep wires from 
>> dangling. 
>> 
>> Maverick Brown
>> Off-Grid Solar Commander since 2006
>> Maverick Solar Enterprises, Inc.
>>  • Solar Commander Remote Power
>>  • SunFlow Systems Cathodic Protection 
>> maver...@mavericksolar.com
>> 512-460-9825
>> 
>> 
>>>> On Mar 13, 2022, at 5:12 PM, Michael Morningstar <mjmornings...@gmail.com> 
>>>> wrote:
>>>> 
>>> 
>>> Wrenches,
>>> Who makes the best cable ties, and which part number for under PV wire 
>>> management? I keep going back to past projects where I used quality 
>>> high-heat resistant UV rated Panduit and Burndy ties that became brittle.
>>> Thanks,
>>> Michael
>>> 
>>> -- 
>>> Michael Morningstar
>>> 
>>> Morningstar Electric
>>> PO Box 1494
>>> Mount Shasta, CA 96067
>>> 530-921-0560
>>> mjmornings...@gmail.com
>>> 
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> Pay optional member dues here: http://re-wrenches.org
>>> 
>>> List Address: RE-wrenches@lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> There are two list archives for searching. When one doesn't work, try the 
>>> other:
>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>> 
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org
>>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the 
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to