Thank you William, I did it from memory, which I should not trust at 85 it is screwy I should have gone back to 'first principles' instead of trusting the memory of an old job. Thank you
On Fri, Apr 1, 2022 at 9:23 AM William Miller via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Wrenches: > > > > I found some on-line pump HP calculators, such as this > <https://engineeringunits.com/pump-power-calculator/> one. Plugging in 1 > gpm of water pumped to 300 feet elevation results in 0.1 HP, not 5. I have > no idea how Daryl arrived at 5 HP. > > > > Plugging in the 10 gpm we want, the HP required is a little over 1. I > tried several calculators and worked the formula myself and all approaches > resulted in the same answer. > > > > William > > > > Miller Solar > > 17395 Oak Road, Atascadero, CA 93422 > > 805-438-5600 > > www.millersolar.com > > CA Lic. 773985 > > > > > > *From:* Wesley Kennedy [mailto:hathaso...@yahoo.com] > *Sent:* Monday, March 28, 2022 9:58 AM > *To:* RE-wrenches > *Cc:* William Miller; Darryl Thayer > *Subject:* Re: [RE-wrenches] Water Pumping 24/7 > > > > Hi Darryl, > > I’d love to see that math on that.you mind sharing? > > -Wes > > 303-653-3073 > > > > > > On Mar 27, 2022, at 1:27 PM, Darryl Thayer via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > > > > Hello, Sorry to be so late but I have been overloaded. Just a note on > physics of lifting water. The calculation indicates if you pump 1 gallon > per minute up 300 feet it required a water hp of 5 HP > > Use this base number and good pumps are about 70% efficient. If the flow > rate is not 1 GPM adjust the HP accordingly. For example, if you want to > pump 10 GPM it requires 50 HP or if you want to pump 10 Gallons / day it > requires (50HP/ 24h 60min )requiring 0,035 HP.. > > Again I apologize for delay. > > > > On Wed, Mar 16, 2022 at 1:33 AM William Miller <will...@millersolar.com> > wrote: > > Hilton: > > A valid point. However in this region wells often do not recharge as well > as we might like. In these cases, to meet gallons per day you have to pump > long and slow--more hours per day than the sun will be up. That means of > course generator or battery storage. > > The economics have shifted from when I started installing direct-DC water > pumping. The money that is being spent today to provide commercial ag > water > is beyond what I would have comprehended back then. This means new > technology--and questions need to be asked, including considering battery > storage. > > Thanks for your reply. > > William > > Miller Solar > 17395 Oak Road, Atascadero, CA 93422 > 805-438-5600 > www.millersolar.com > CA Lic. 773985 > > > > -----Original Message----- > From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On > Behalf Of Hilton Dier > Sent: Tuesday, March 15, 2022 6:56 PM > To: RE-wrenches@lists.re-wrenches.org > Subject: [RE-wrenches] Water Pumping 24/7 > > Here’s a lateral take on this. A 500 gallon poly water tank is far cheaper > than the batteries needed to fill it. > > Years ago I rigged up a seasonal pump system for a man who had two ponds on > his property. The lower one was well fed by a spring but the upper one > wasn’t. > I used a 200 watt DC piston pump and a couple of modules with a linear > current booster. A couple of breakers but no batteries. It just chugged > away > quietly all (moderately sunny) day, filling the upper pond. > > Using a positive displacement pump is key for minimizing power > requirements. > At 300 feet that’s about 125 psi, which is not out of line for a piston > pump. Fill a big poly tank and pressurize it with a small DC diaphragm pump > if necessary. > > Simple, efficient, cheap. > > Hilton Dier III > Renewable Energy Design > Missisquoi River Hydro LLC > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org