Regarding the tape on the back sheet I have seen Novis installers keep the tape to secure the modules and I have also seen it with the tape stll attached to the wires laying on the roof so in my humble opinion the tape is for shipping only and is not to be used as a wire management system. Jerry NABCEP PV Inspector
On Thu, Jun 2, 2022 at 6:37 AM Dave Tedeyan via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi All, > > I just got some of the Qcell 360w AC modules that have the Enphase > microinverter factory applied to the back. The module is the half cut cell > type with the DC leads coming from either side of the middle of the module. > The modules come with the wires taped to the back of the module. If you > remove that tape, there appears to be almost no way to properly manage > those wires. Is that tape meant to just keep the wire on the back of the > module forever? Would that even last more than a year? I am curious what > other people have done for these if they have used them or something > similar. Maybe if you get the rail in the right spot, the wires will just > sit on the rail... > > I realize that we have had a thread on wire management with half cut cell > modules before, but this is a little different, as I am specifically asking > about that tape and if anyone knows if it holds up over time. > > Cheers, > Dave > > -- > [image: Logo] <https://www.sungineersolar.com/> > Dave Tedeyan, P.E. > Owner | Sungineer Solar > p: he | him | his > a: 1653 Slaterville Rd. | Ithaca, NY 14850 > w: www.sungineersolar.com <http://www.sungineersolar.com/> > c: (607) 288-2898 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
