Jason

The old Sol-Ark had the PV disconnect and the Wi-Fi adapter connection on the 
bottom and that needed about six or 8 inches of clearance. The current Sol-Ark 
has those items on the side of the unit so you don’t need such clearance on the 
bottom. I installed several Sol-Ark and I use the relatively close arrangement 
between the gutter and the inverter of two EMT male adapters and a just enough 
EMT to make them connect. 



Thank you,

Maverick


> On Aug 2, 2023, at 10:04 AM, Jason Szumlanski via RE-wrenches 
> <re-wrenches@lists.re-wrenches.org> wrote:
> 
> 
> I see a lot of pictures with conduit nipples coming out of a gutter that are 
> fairly long. I have a height limit issue and I'm wondering if there are any 
> negative implications of using very short nipples between a wireway below and 
> the inverter. I'm thinking about using close nipples or perhaps 2-in nipples 
> if I have enough room.
> 
> If there are any practical reasons that this will not work well, please let 
> me know.
> 
> Jason Szumlanski
> Florida Solar Design Group 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to