Peter:


I have only purchased one set of Fortress batteries.  There have been
issues, I am sure many of them self-induced.  Fortress has been overall
very responsive.  There have been a few days where I could not get through
to technical support but with persistence I always manage.  Fortress has
offered truck–roll compensation at a reasonable rate as well.



William Miller



Miller Solar

17395 Oak Road, Atascadero, CA 93422

805-438-5600

www.millersolar.com

CA Lic. 773985





*From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
Behalf Of *Peter Giroux via RE-wrenches
*Sent:* Wednesday, February 14, 2024 6:47 AM
*To:* 'RE-wrenches'
*Cc:* pgir...@mindspring.com
*Subject:* [RE-wrenches] Fortress



Good morning my fellow wrenchers. While I see the comments on SunPower and
the challenges, are any of you having similar issues with Fortress? Their
bms boards from the early classics have not held up and even after
replacement there are still issues ( parallel batteries and stand alone not
showing accurate #’s,  ). While support has been, well supportive, the
issues persist. Any thoughts or fixes you have come up with?? I just had a
customer unplug the coms cable from their sol-ark and bring their readings
to volts VS %% and it is starting to work a bit better. Any and all help or
ideas appreciated.



Thx
peter Giroux

American Solar

Norcross Ga
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to