I second using the 48v to 12 v DC DC converter.  I've had success with that, and avoided the issues Jeremy mentioned.

Ray Walters
Remote Solar

On 2/17/2024 9:35 AM, Bradley Bassett via RE-wrenches wrote:
I powered a MidNite LSOB transmitter from a Classic AUX, though the receivers didn't work with the Classic. The Classic is limited to 200ma output and the Tigo and APS transmitters are rated at up to 800ma input, so it might overload the Classic AUX output if they really do draw that much.

I tested an APS RSD system recently with a Classic and it did not work well. I believe that the Tigo transmitter is very similar since the APS devices say "licensed by Tigo" on them, So, the Tigo RSD devices may not work well with a Classic either.

What I recommended while at AEE was to use a 48VDC to 12VDC converter to power the Tigo and APS transmitters. This works well. Here's the one I recommended if it's still available: mean-well/ddr30l12 <https://www.onlinecomponents.com/mean-well/ddr30l12-50161036.html>    I never had any negative feedback using this with a Sol-Ark and APS devices.

With a Classic in the system I've had to use the FireRaptor RSD devices. If you can get approval or have older modules, you might be able to follow the FireRaptor instructions and use 2 modules in series for each FireRaptor. You do still have to have a way to disconnect the PV output circuit from the Classic in order to make that circuit dead from the Classic end of the circuit. I did that by putting an MNPV6-disco on the power shed which disconnects the PV output circuit as well as the 24VDC to the FireRaptors. And, I am powering my FireRaptors at 15VDC and it works fine.

Brad Bassett, ret.




On Fri, Feb 16, 2024 at 6:47 PM Jeremy Rodriguez via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:

    Has anyone successfully used a MidNite Classic CC to power a Tigo
    Rapid Shutdown Transmitter in an off grid setting ? Specifically
    using the 12v Aux output to keep the PV circuits alive instead of
    relying on the inverter AC output to do this.

    Think of this scenario.  Batteries reach LBCO, inverter shuts OFF,
    no PV to re charge back to LBCI, no generator backup to recharge
    batteries.


    Jeremy Rodriguez
    Solar Installation / Design
    All Solar, Inc.
    1453 M St.
    Penrose Colorado 81240

    Sent by Jeremy's iPhone. Sorry for typos and shorthand.
    _______________________________________________
    List sponsored by Redwood Alliance

    Pay optional member dues here: http://re-wrenches.org

    List Address: RE-wrenches@lists.re-wrenches.org

    Change listserver email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    There are two list archives for searching. When one doesn't work,
    try the other:
    https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    http://www.re-wrenches.org/etiquette.htm

    Check out or update participant bios:
    http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to