Hello Wrenches,
I just fired up a new off grid solar array with the FM100 arc fault
version. RIght off I got the
arc fault/ground fault red light. It was the end of day with 145 V from
the array but no current. Question is, if I want to disable the function,
will simply not passing wires through the current transducer effectively
defeat the fault. or does the circuit board have to be pulled as well. I
have a new FM100 that I bought on Ebay that I just hooked up to my home
system. It is dark so I won't know until tomorrow if it is good but at
least no red light and I simply did not pass wires through the ring. If it
works tomorrow, is this a reasonable way to leave it wired up. Solar array
in both cases are pole mounts. I pulled the arc fault circuit board on the
customer's system but still a fault light.
John Blittersdorf
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
