What is the most elegant way to combine two of the Powerflo16 batteries when using a single AIO?
The manual doesn't require fusing when paralleling 3 or fewer batteries. I was thinking about a Victron Lynx Distributor inside an enclosure, but that enclosure would have to be quite large to accommodate all of that (four 2/0 in, two 4/0 out), and since fuses aren't required, standard busbars would probably be much smaller and simpler. I like how the EG4 batteries have a matching conduit box and parallel bussing is integrated. I want something equally elegant for the PowerFlo16. It's too bad we can't parallel right at the battery terminals. Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
