Jason,
Is there room to double up cables inside the AIO? Two equal length sets
of battery cables between the batteries and the AIO should work.
Kent Osterberg
Blue Mountain Solar
On 7/16/2025 12:52 PM, Jason Szumlanski via RE-wrenches wrote:
What is the most elegant way to combine two of the Powerflo16
batteries when using a single AIO?
The manual doesn't require fusing when paralleling 3 or fewer
batteries. I was thinking about a Victron Lynx Distributor inside an
enclosure, but that enclosure would have to be quite large to
accommodate all of that (four 2/0 in, two 4/0 out), and since fuses
aren't required, standard busbars would probably be much smaller and
simpler. I like how the EG4 batteries have a matching conduit box and
parallel bussing is integrated. I want something equally elegant for
the PowerFlo16. It's too bad we can't parallel right at the battery
terminals.
Jason Szumlanski
Florida Solar Design Group
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:[email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
