The manual seems to indicate diagrammatically that a Cat5 cable is required between the GridBoss and each FlexBoss inverter, but the text seems to indicate only a single Cat5 wire is required between the GridBoss and master FlexBoss.
Can anyone confirm if a single Cat5 will work? I have a 100 foot run from the GridBoss to my inverters. I'm thinking about using a single Cat5 cable for comms and a CL3R cable for the RSD connection through the attic. Obviously, the included parallel cable should be used between the inverters. I get that part. Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
