This is 600V stranded CAT5e cable that is fairly inexpensive, readily available, and nice and flexible.
https://www.automationdirect.com/adc/shopping/catalog/bulk_wire_-a-_cable/data_-a-_communication_cable/q5752-1 I make equipment that goes in the Arctic and Antarctic and the flexibility is important to me. This stuff is good. We terminate it with Platinum EZ-RJ-45 CAT5e *shielded* connectors. The shield isn't used, but the connector accommodates the relatively large jacket on 600V cable. -James Jefferson Jarvis APRS World, LLC +1-507-454-2727 http://www.aprsworld.com/ On Tue, Sep 30, 2025 at 7:04 AM Jason Szumlanski via RE-wrenches < [email protected]> wrote: > Not to hijack the thread, but this question is related. I'm looking for a > source for 600V Ethernet cable that won't break the bank. > > > Jason Szumlanski > Principal Solar Designer | Florida Solar Design Group > NABCEP Certified Solar Professional (PVIP) > Florida State Certified Solar Contractor CVC56956 > Florida Certified Electrical Contractor EC13013208 > > > On Mon, Sep 29, 2025 at 10:08 PM Mick Abraham via RE-wrenches < > [email protected]> wrote: > >> Hi, Mechanix~ >> >> Can someone suggest a shop to provide a "solar" ethernet cable? I'd like >> to get this with the RJ45 plugs professionally installed so I don't have to >> learn new tricks. I need quantity one for an SMA Sunny Tripower 50kW PV >> inverter. >> >> * Length is TBD but prolly ~ 30 feet >> >> * Sunlight resistant >> >> * Cat 5e or higher >> >> * Cable bandwidth: 100 Mbps (100Base Tx copper wire, 24AWG same as 0.22 >> mm²) >> >> * Shielding: SF/UTP, S/UTP, SF/FTP or S/FTP >> >> * Voltage rating 250-ish or higher: I plan to put the power wires in an >> EMT conduit and to keep the data wire outside the conduit. >> >> * If I've understood the SMA instructions correctly, I only need two wire >> pairs but more would of course be OK. >> >> * Standard patch cable wiring (not crossover) >> >> Shipment would be to a biz address in 81147 CO. Suggestions "on the List" >> or "off the List" would be welcomed. The Wrench List is the Bomb! >> >> Mick Abraham, Proprietor >> www.abrahamsolar.com >> >> Cell phone or for text messaging: 970-946-6584 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
