On Mar 08, 2007, at 08:45 UTC, Youri wrote: > Thank you for the links. I must have a closer look at it as there are > no mention of Mac OS X drivers in the different things I have seen. > Of course I could go with a PC, but...
Anything that uses a serial or TCP/IP interface needs no Mac drivers. These protocols are universal; you can use them on any platform in RB via a Serial or TCPSocket control. > The solution with TCP/IP webcams seems interesting as it looks quite > easy to set. Using a RB app that would monitor each webcam in a loop > or at demand using a simple htmlwiever. You probably could do it that way, or for more control, use an HTTPSocket to speak to the webcam directly. > I have to have a closer look at the Pololu and ETH32 as I am a total > novice in Electronic. They're quite easy. I have a very beginner-level tutorial for using the Pololu motor controller -- but the servo controller is quite similar: <http://www.strout.net/info/robotics/tutorials/Pololu0410.html> This should get you started even without any experience in electronics. Best, - Joe -- Joe Strout -- [EMAIL PROTECTED] Verified Express, LLC "Making the Internet a Better Place" http://www.verex.com/ _______________________________________________ Unsubscribe or switch delivery mode: <http://www.realsoftware.com/support/listmanager/> Search the archives: <http://support.realsoftware.com/listarchives/lists.html>
