Hi I've used the vRevision 8851. I've compiled modrex fron the sources using the trunk, without problems, but with these new binaries, I can't
¿somebody more try it? Thanks a lot for the answer, Mikko. Albert ///////////////////////////////////////////////////////////////////////////// 2009/3/24 Mikko Pallari <[email protected]>: > > Hi, > > Unfortunately I didn't completly understood what you said, but yes, you > should add that line to OpenSim.ini. > > The configuration section in OpenSim.ini should look something like: > [realXtend] > enabled = true > db_connectionstring = "SQLiteDialect; SQLite20Driver; Data > Source=RexObjects.db, Version = 3" > RexEventQueue = True > > But the problem in hand seems to be something else. Error message you sent > indicates that the OpenSim couldn't load the ModularRex.dll and threw a > ReflectionTypeLoadException. Unfortunately the detailed description of the > exception is in Spanish and I can't understand that. > > After a quick search I found that ReflectionTypeLoadException is thrown if > any of the classes in module cannot be loaded [1]. Which revision of the > OpenSim are you running? ModreX requires to use revision 8814 or later? > > > [1]: > http://msdn.microsoft.com/en-us/library/system.reflection.reflectiontypeloadexception.aspx > > ______________________________ > Mikko Pallari > Server Technical Lead in RealXtend > > ADMINO technologies > www.adminotech.com > www.realxtend.org > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Gustavo Alberto Navarro Bilbao > Sent: 24. maaliskuuta 2009 11:01 > To: [email protected] > Subject: [realXtend] Re: Grab your modrex binaries here > > Hi again > > The problems I found are: > > After compiling a new opensim, compobar start and I can enter the region, > proceed to add the line: > [realXtend] > db_connectionstring = "SQLiteDialect; SQLite20Driver; Data Source = > RexObjects.db, Version = 3" > > Binaries included in the bin folder, prompted replacement files, boot as > usual autenficathion /storage/ opensim and then gives the error that > attached to the post. > > * If I replace the files in a newly downloaded version of opensim, before > compiling and then compiling it also gives error. > > Moreover, in a opensim.ini mode modrex, just as we realXtend section: > [realXtend] > db_connectionstring = "SQLiteDialect; SQLite20Driver; Data Source = > RexObjects.db, Version = 3" > > Because that, to do your recommendation of: > > " 2) "enabled = true" line exist under [realXtend] section in OpenSim.ini." > > Should we add the corresponding lines in a opensim.ino of realXtend? > > 2009/3/24 Mikko Pallari <[email protected]>: >> >> Hi, >> >> This and other pre-alpha releases are not intended for end users, but only >> for really advanced users who want to experiment before the official >> version. This was discussed previously in another thread [1]. >> >> To use binaries in release, first build OpenSim. After building OpenSim the >> binaries in the packet must to be placed in bin directory of OpenSim. >> >> To build ModreX from the source is a different question. There are at least >> two different paths to build ModreX. >> >> 1) Run the prebuild under OpenSim, run the prebuild under ModularRex, open >> up the OpenSim solution, add the five (previously 3) projects to solution. >> >> 2) Run the prebuild under OpenSim, run nant, run the prebuild under >> ModularRex, run nant >> >> And to answer to your last question, it seems that the login_to_simulator >> XMLRPC method is not overloaded properly. To ensure that it will be >> overloaded 1) check that ModularRex.dll exists in your OpenSim's bin >> directory and that 2) "enabled = true" line exist under [realXtend] section >> in OpenSim.ini. >> >> >> [1]: >> http://groups.google.com/group/realxtend/browse_thread/thread/7cd38488 >> d8bdee0c >> >> ______________________________ >> Mikko Pallari >> Server Technical Lead in RealXtend >> >> ADMINO technologies >> www.adminotech.com >> www.realxtend.org >> >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] >> On Behalf Of Gustavo Alberto Navarro Bilbao >> Sent: 23. maaliskuuta 2009 21:41 >> To: [email protected] >> Subject: [realXtend] Re: Grab your modrex binaries here >> >> >> Mikko, I'm quite confused about how to use the binary you uploaded, >> and I suppose some users too. >> Where do you get? Replace the contents of the trunk? That means that >> when creating the solution are no longer needed enter 3 projects to >> the existing OpenSim solution to rebuild it? >> >> I've done it, and recompiled without errors but I can't get >> credentials from login XML. >> >> The authentication server show "CLIENT LOGGIN IN TO SIM: >> testu...@http://127.0.0.1:9000 >> >> and the opensim show: [LOGIN END]: XMLRPC login_to_simulator login >> mesage did not contain all the required data. >> >> Sure than I made some, or a lot, of wrong process. >> >> Thks >> >> ////////////////////////////////////////////////////////////////////// >> ////////////////// >> >> 2009/3/23 Mikko Pallari <[email protected]>: >>> >>> Ok, I have now uploaded the binaries of revision 99 to >>> http://forge.opensimulator.org/gf/project/modrex/frs/ >>> >>> This release works with OpenSim revisions 8814 or greater. >>> >>> And although we have made progress from last month, it still has many known >>> and unknown bugs. >>> >>> ______________________________ >>> Mikko Pallari >>> Server Technical Lead in RealXtend >>> >>> ADMINO technologies >>> www.adminotech.com >>> www.realxtend.org >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] >>> On Behalf Of Gustavo Alberto Navarro Bilbao >>> Sent: 23. maaliskuuta 2009 13:41 >>> To: [email protected] >>> Subject: [realXtend] Re: Grab your modrex binaries here >>> >>> I've just download the bianries, here, in another machine at my job's >>> place, and, just you can see in the capture attached to this post, all the >>> services, Authentication, storage and OpenSim, works without errors. >>> >>> >>> I can start and test the viewer, with the 127.0.0.1 ip, but not with the >>> external ip, because the security's configuration of the proxy here, but >>> the conexion with the modrex works well. >>> >>> ********************************************************************* >>> *** >>> 2009/3/23 Gustavo Alberto Navarro Bilbao <[email protected]>: >>>> Yes, I did, and in mine tests, in my local machine, works perfectly, >>>> without errors, compiled with the last opensim sources, the v 8822 >>>> for opensim and v. 99 for modrex like Paul says me, and with that >>>> the compilation with Visual 2008n was finished withoy errors. >>>> As I know, some testers had used this bianries without problems. >>>> >>>> ¿Somebody more tested it in XP? >>>> >>>> ******************************************************************** >>>> ** >>>> ******** >>>> >>>> 2009/3/23 Mikko Pallari <[email protected]>: >>>>> >>>>> The file is called: ModularRex.RexOdePlugin.dll >>>>> >>>>> ______________________________ >>>>> Mikko Pallari >>>>> Server Technical Lead in RealXtend >>>>> >>>>> ADMINO technologies >>>>> www.adminotech.com >>>>> www.realxtend.org >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: [email protected] >>>>> [mailto:[email protected]] >>>>> On Behalf Of Ralf Haifisch >>>>> Sent: 23. maaliskuuta 2009 11:38 >>>>> To: realXtend >>>>> Subject: [realXtend] Re: Grab your modrex binaries here >>>>> >>>>> >>>>> oops... >>>>> >>>>> Alberto, you did build on Windows - according to >>>>> http://opensimulator.org/wiki/ModRex >>>>> ?? >>>>> >>>>> Mikko, how should the file be called ? maybe its just missplaced >>>>> somehow ? >>>>> Is it RexOpenDynamicsEngine.exe or .dll ?? >>>>> >>>>> >>>>> cheers, >>>>> Ralf >>>>> >>>>> On 23 Mrz., 08:27, Mikko Pallari <[email protected]> wrote: >>>>>> Hi, >>>>>> >>>>>> It seems that the zip file is missing the physics engine. It should be >>>>>> located in bin/Physics. >>>>>> >>>>>> ______________________________ >>>>>> Mikko Pallari >>>>>> Server Technical Lead in RealXtend >>>>>> >>>>>> ADMINO technologieswww.adminotech.comwww.realxtend.org >>>>>> >>>>>> >>>>>> >>>>>> -----Original Message----- >>>>>> From: [email protected] >>>>>> [mailto:[email protected]] >>>>>> On Behalf Of Ralf Haifisch >>>>>> Sent: 23. maaliskuuta 2009 0:53 >>>>>> To: realXtend >>>>>> Subject: [realXtend] Re: Grab your modrex binaries here >>>>>> >>>>>> trying to run it on Linux: >>>>>> >>>>>> i had to reachive it ... when i directly downloaded to linux the >>>>>> files did include the path in their name and the folder where >>>>>> empty ?? never seen that. did download to windows , unzip , >>>>>> rezip (standard zip on vista), upload to linux - all fine. >>>>>> >>>>>> the i did unzip on linux and configure the store, auth and opensim >>>>>> for my setting. >>>>>> store and auth are cummin up well. >>>>>> >>>>>> opensim dies with: >>>>>> >>>>>> 22:35:56 - [PHYSICS]: creating meshing engine ZeroMesher >>>>>> 22:35:56 - [PHYSICS]: couldn't find physicsEngine: >>>>>> RexOpenDynamicsEngine >>>>>> OpenSim threw an exception: >>>>>> System.ArgumentException: couldn't find physicsEngine: >>>>>> RexOpenDynamicsEngine >>>>>> at >>>>>> OpenSim.Region.Physics.Manager.PhysicsPluginManager.GetPhysicsScen >>>>>> e (System.String physEngineName, System.String meshEngineName, >>>>>> IConfigSource config, System.String regionName) [0x00000] >>>>>> at >>>>>> OpenSim.Region.ClientStack.RegionApplicationBase.GetPhysicsScene >>>>>> (System.String engine, System.String meshEngine, IConfigSource >>>>>> config, System.String osSceneIdentifier) [0x00000] >>>>>> at OpenSim.OpenSimBase.GetPhysicsScene (System.String >>>>>> osSceneIdentifier) [0x00000] >>>>>> at OpenSim.OpenSimBase.SetupScene (OpenSim.Framework.RegionInfo >>>>>> regionInfo, Int32 proxyOffset, IConfigSource configSource, >>>>>> IClientNetworkServer& clientServer) [0x00000] >>>>>> at OpenSim.OpenSimBase.CreateRegion >>>>>> (OpenSim.Framework.RegionInfo regionInfo, Boolean portadd_flag, >>>>>> Boolean do_post_init, IScene& >>>>>> mscene) [0x00000] >>>>>> at OpenSim.OpenSimBase.CreateRegion >>>>>> (OpenSim.Framework.RegionInfo regionInfo, Boolean portadd_flag, IScene& >>>>>> scene) [0x00000] >>>>>> at >>>>>> OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostIniti >>>>>> al >>>>>> ise >>>>>> () [0x00000] >>>>>> at OpenSim.OpenSimBase.StartupSpecific () [0x00000] >>>>>> at OpenSim.OpenSim.StartupSpecific () [0x00000] >>>>>> at OpenSim.Framework.Servers.BaseOpenSimServer.Startup () [0x00000] >>>>>> at OpenSim.Application.Main (System.String[] args) [0x00000] >>>>>> at OpenSim._32BitLaunch.Program.Main (System.String[] args) >>>>>> [0x00000] >>>>>> >>>>>> Application will now terminate! >>>>>> >>>>>> so - that is the same error i get on my own compilation. >>>>>> >>>>>> where should i find "RexOpenDynamicsEngine" ? >>>>>> >>>>>> in the directory cotaining the opensim executables and config, the >>>>>> only Rex* is "RexObjects.db". >>>>>> >>>>>> next thing it thougth was, that i did miss something or something >>>>>> was missing at the compile incrutions on opensimulator.org >>>>>> >>>>>> i did unzip to a fresh directory and run the OpenSimulator.32Launch. >>>>>> >>>>>> it dies with the error: >>>>>> >>>>>> 22:48:30 - [VOICECHAT]: Connection handler started... >>>>>> 22:48:30 - [NHIBERNATE]: Initializing NHibernateRexObjectData >>>>>> OpenSim threw an exception: >>>>>> System.DllNotFoundException: System.Data.SQLite.DLL >>>>>> at (wrapper managed-to-native) >>>>>> System.Data.SQLite.UnsafeNativeMethods:sqlite3_open_interop (byte >>>>>> [],intptr&) >>>>>> at System.Data.SQLite.SQLite3.Open (System.String strFilename) >>>>>> [0x00000] >>>>>> at System.Data.SQLite.SQLiteConnection.Open () [0x00000] >>>>>> at NHibernate.Connection.DriverConnectionProvider.GetConnection >>>>>> () [0x00000] >>>>>> at OpenSim.Data.NHibernate.NHibernateManager.RunMigration >>>>>> (System.String dialect, System.Reflection.Assembly assembly, >>>>>> System.String store) [0x00000] >>>>>> at OpenSim.Data.NHibernate.NHibernateManager..ctor >>>>>> (System.String connect, System.String store, >>>>>> System.Reflection.Assembly assembly) [0x00000] >>>>>> at ModularRex.NHibernate.NHibernateRexAssetData.Initialise >>>>>> (System.String connect) [0x00000] >>>>>> at ModularRex.RexParts.ModRexMediaURL.PostInitialise () [0x00000] >>>>>> at OpenSim.Region.Framework.ModuleLoader.PostInitialise () >>>>>> [0x00000] >>>>>> at >>>>>> OpenSim.ApplicationPlugins.LoadRegions.LoadRegionsPlugin.PostIniti >>>>>> al >>>>>> ise >>>>>> () [0x00000] >>>>>> at OpenSim.OpenSimBase.StartupSpecific () [0x00000] >>>>>> at OpenSim.OpenSim.StartupSpecific () [0x00000] >>>>>> at OpenSim.Framework.Servers.BaseOpenSimServer.Startup () [0x00000] >>>>>> at OpenSim.Application.Main (System.String[] args) [0x00000] >>>>>> at OpenSim._32BitLaunch.Program.Main (System.String[] args) >>>>>> [0x00000] >>>>>> >>>>>> Application will now terminate! >>>>>> >>>>>> i look into the OpnSim.ini , and the only "rex" found in the file is: >>>>>> >>>>>> db_connectionstring = "SQLiteDialect;SQLite20Driver;Data >>>>>> Source=RexObjects.db;Version=3" >>>>>> >>>>>> i would expect more "rex" lines according >>>>>> tohttp://opensimulator.org/wiki/ModRex, >>>>>> but have no clue what the "SQLiteDialect" does mean ?!? >>>>>> >>>>>> running: >>>>>> >>>>>> Mono JIT compiler version 2.0.1 (tarball) Copyright (C) 2002-2008 >>>>>> Novell, Inc and Contributors.www.mono-project.com >>>>>> TLS: __thread >>>>>> GC: Included Boehm (with typed GC) >>>>>> SIGSEGV: altstack >>>>>> Notifications: epoll >>>>>> Architecture: amd64 >>>>>> Disabled: none >>>>>> >>>>>> is this incompatible ? >>>>>> >>>>>> any idea where to dig ? >>>>>> >>>>>> did anyone run this on linux ? >>>>>> >>>>>> linux amd64 ? >>>>>> >>>>>> linux amd64 mono 2.x ? >>>>>> >>>>>> cheers, >>>>>> Ralf >>>>>> >>>>>> On 22 Mrz., 11:33, Jani Pirkola <[email protected]> wrote: >>>>>> > Hi, >>>>>> >>>>>> > Albert from Hispagrid uploaded modrex binary with all the >>>>>> > necessary servers (opensim + realXtend authentication+avatar >>>>>> > storage) and instructions to CTN web site. Grab your copy here (tested >>>>>> > in Windows): >>>>>> > realXtend Modrex status update >>>>>> > <http://www.cybertechnews.org/?p=1290>Note >>>>>> > that modrex is still pre-alpha and may not work as expected. >>>>>> >>>>>> > Modrex is a DLL that provides the realxtend enhancements to an >>>>>> > Opensim server; voice, free-form avatar, 3D meshes, shadows, >>>>>> > OGRE3D rendering, skype calls, and more. (realXtend viewer is >>>>>> > needed too!) >>>>>> >>>>>> > Best regards, >>>>>> > Jani >>>>>> >>>>>> > PS: check also tutorials how to do things in >>>>>> > realXtend:http://wiki.realxtend.org >>>>>> > and >>>>>> > this:http://wiki.realxtend.org/index.php/Content_Community_Contr >>>>>> > ib >>>>>> > uted_Tut...- Zitierten Text ausblenden - >>>>>> >>>>>> - Zitierten Text anzeigen - >>>>> >>>>> >>>>> >> >>>>> >>>> >>> >>> >>> >>> > >>> >> >> >> >> > >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ http://groups.google.com/group/realxtend http://www.realxtend.org -~----------~----~----~----~------~----~------~--~---
