Pessoal,
Estamos configurando um link frame-relay em uma das seriais de um
Cisco 2501 - IOS 11.1(8).
Acontece q. esse link vem de um MUX(NewBridge - 3600) cujo patch-panel
� DB25 e usamos um conversor para V-35 ,feito conforme especifica��o dada
pela prestadora, j� q. o cabo Cisco � nesse padr�o (V35-DTE).
Hoje tenho nessa path-panel duas lp's ponto-a-ponto com mesmo conversor
e funcionando.
Acontece q. em teste com equipamento da prestadora do link, o sinal �
pego por S�o Paulo, j� conectando-se o roteador, nenhum sinal � pego.
E a porta serial fica up, mas "line protocol down" e na sub-interface
fica serial down e line protocol down. J� no PVC temos DLCI USAGE = LOCAL e
PVC STATUS = DELETED e no lmi temos (Frame Relay DTE) LMI TYPE = ANSI
Pelos padr�es b�sicos de config. sem querer inventar nada, acho q.
deveria aparecer algum sinal na prestadora, MAS nada disso acontece.
Minha pergunta: o cabo V.35-DTE q. acompanha o Cisco, no caso de FR
sofre alguma mudan�a de c�digo? Pelos papers q. peguei da Cisco, nada fala.
OBRIGADO por qq. informa��o,
Pinheiro - GCNET / Unicamp
e-mail: [EMAIL PROTECTED]
OBS: Config. b�sica;
....
interface Serial1
description "unicamp <-> fr "
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
!
interface Serial1.1 point-to-point
ip address xxx.xxx.xxx.xxx aaa.aaa.aaa.aaa
ip broadcast-address yyy.yyy.yyy.yyy
frame-relay interface-dlci nn
!
Serial1 is up, line protocol is down
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec)
LMI enq sent 814, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 6
Last input never, output 00:00:13, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/64/0 (size/threshold/drops)
Conversations 0/5 (active/max active)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
815 packets output, 11854 bytes, 0 underruns
0 output errors, 0 collisions, 277 interface resets
Serial1.1 is down, line protocol is down
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation FRAME-RELAY IETF
|
