|
Valdinei,
O colega Marcelo lembrou muito bem, o bandwidth tem de ser colocado para cada acesso tanto nas sub-interfaces do principal (256kbps) como nas interfaces ou sub-interfaces nos secund�rios (64Kbps).
Abra�os,
Wilson Chiclet
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 20, 2000 1:33 PM
To: Lista de Discussco Rede Wan
Subject: RE: [redewan] Cisco, Frame relay e config. CIR
Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br
Valdinei,
Segue um exemplo de configura��o:
Router Principal:
interface Serial1/0
description N� Central
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
bandwidth 256
no fair-queue
cdp enable
frame-relay lmi-type ansi
frame-relay ip rtp header-compression
frame-relay qos-autosense
!
interface Serial1/0.1 point-to-point
description Sub-interface
ip address xxx.xxx.xxx.xxx 255.255.255.0
no ip directed-broadcast
ip ospf cost 100
no ip mroute-cache
bandwidth 64
frame-relay interface-dlci 16 IETF
frame-relay ip rtp header-compression
!
interface Serial1/0.2 point-to-point
description Sub-interface
ip address xxx.xxx.xxx.xxx 255.255.255.0
no ip directed-broadcast
ip ospf cost 100
no ip mroute-cache
bandwidth 64
frame-relay interface-dlci 16 IETF
frame-relay ip rtp header-compression
!
Router de Acesso:
!
interface Serial0/0
description
bandwidth 64
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
no fair-queue
cdp enable
frame-relay traffic-shaping
frame-relay lmi-type ansi
frame-relay ip rtp header-compression
frame-relay qos-autosense
!
interface Serial0/0.1 point-to-point
description
bandwidth 64
ip address xxx.xxx.xxx.xxx 255.255.255.0
no ip directed-broadcast
ip ospf cost 100
no ip mroute-cache
frame-relay interface-dlci 30 IETF
frame-relay ip rtp header-compression
!
Marcelo Souza Silva
Assessor de Telecomunica��es
Shell Brasil S.A
Tel: +55 21 559 8207
Fax: +55 21 559 7568
e-mail: [EMAIL PROTECTED]
> ----------
> From: Valdinei Castelan[SMTP:[EMAIL PROTECTED]]
> Sent: Ter�a-feira, 19 de Dezembro de 2000 20:10
> To: Lista de Discussco Rede Wan
> Subject: [redewan] Cisco, Frame relay e config. CIR
>
> Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br
>
> Caros amigos,
>
> Tenho o seguinte caso:
>
> Um link frame-relay 256 com cir 128, interligando pontos b, c, d, etc de
> 64 com cir 32.
>
> N�o configurei nada especificamente quanto a CIR, etc, entendendo que a
> utiliza��o de banda se controlava automaticamente, mas me parece que n�o �
> assim. Como devo configurar o router Cisco 2501 e 1601?
>
> Grato,
>
>
> Valdinei Castelan
> Diretor de Tecnologia
> CNE - Certified Novell Engineer
> MCP - Microsoft Certified Professional
> [EMAIL PROTECTED]
>
>
> DPI Desenv. de Projetos em Inform�tica
> www.dpinet.com.br // 0 xx 15 227-8104
> Sorocaba - S�o Paulo - Brazil
>
>
> ______________________________________________________________________
>
|
