Hello
After installing RH6.0 on my AMD K6-2 450 Mhz, 64 Mb.RAM, underclocked
at 333 Mhz, I always have been getting this problem:
At shutdown, either by root or by ortolojf user, the shutdown
process works well, until after the 'Power Down' message.
Instead of switching off the computer, the process logs these
error messages on the screen, then halt.
last available screen after halting:
------------------------------------------------------------------------------
fe>] [<c012519b>] [<c01251be>]
[<c01109a7>] [<c01095a82>]
Code:<1>Unable to handle kernel paging request at virtual address 00008a5d
current->tss.cr2=03d30000, %cr3=03d30000
*pde=00000000
Oops:0000
CPU: 0
EIP: 0010:[<c0109a09>]
EFLAGS:00010046
eax:00000000 ebx:00000000 ecx:00008a5d edx:00000001
esi:0000002b edi:c3ce2000 ebp:c4000000 esp:c3ce1d2c
ds: 0018 es: 0018 ss: 0018
Process halt (pid:787, process nr:11, stackpage=c3ce1000)
Stack:fee1dead 67890000 c0228d62 bfff8146 fee1dead 67890000 0000fdfa
00000001
00000001 00000000 00008a5d 00010046 03ff0000 c4800000 c0109abc c3ce1da0
c01ce898 c01ce96d 0000fdf8 c3ce1da0 c0109f70 c01ce96d c3ce1da0 0000fdf8
Call Trace:[<c4800000>][<c0109a6c>][<c01ce898>][<c01ce96d>][<c0109f70>]
[<c01ce96d>][<c01096ad>]
[<c010719d>][<c0107290>][<c01072b3>][<c01072d1>][<c0107fb9>][<c0113bb7>]
[<c01d032a>][<c014d3bd>]
[<c010f335>][<c010f550>][<c010fc17>][<c012f533>][<c01240fe>][<c012519b>]
[<c01251be>][<c01109a7>]
[<c01095a8>]
Code: 8a 04 0b 89 44 24 38 50 68 90 e8 1c c0 e8 6d 99 00 00 83 c4
----------------------------------------------------------------------------
Then, there is the log results, at boot up:
Dec 21 09:50:14 ortolojf syslogd 1.3-3: restart.
Dec 21 09:50:14 ortolojf syslog: syslogd startup succeeded
Dec 21 09:50:14 ortolojf syslog: klogd startup succeeded
Dec 21 09:50:14 ortolojf kernel: klogd 1.3-3, log source = /proc/kmsg started.
Dec 21 09:50:14 ortolojf kernel: Inspecting /boot/System.map-2.2.5-15
Dec 21 09:50:14 ortolojf kernel: Loaded 6721 symbols from /boot/System.map-2.2.5-15.
Dec 21 09:50:14 ortolojf kernel: Symbols match kernel version 2.2.5.
Dec 21 09:50:14 ortolojf kernel: No module symbols loaded.
Dec 21 09:50:14 ortolojf kernel: Linux version 2.2.5-15 ([EMAIL PROTECTED])
(gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09
EDT 1999
Dec 21 09:50:14 ortolojf kernel: Detected 333375478 Hz processor.
Dec 21 09:50:14 ortolojf kernel: Console: colour VGA+ 80x25
Dec 21 09:50:14 ortolojf kernel: Calibrating delay loop... 665.19 BogoMIPS
Dec 21 09:50:14 ortolojf kernel: Memory: 63080k/65472k available (996k kernel code,
412k reserved, 924k data, 60k init)
Dec 21 09:50:14 ortolojf kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Dec 21 09:50:14 ortolojf kernel: CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Dec 21 09:50:14 ortolojf kernel: Checking 386/387 coupling... OK, FPU using exception
16 error reporting.
Dec 21 09:50:14 ortolojf kernel: Checking 'hlt' instruction... OK.
Dec 21 09:50:14 ortolojf kernel: POSIX conformance testing by UNIFIX
Dec 21 09:50:14 ortolojf kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb5b0
Dec 21 09:50:14 ortolojf kernel: PCI: Using configuration type 1
Dec 21 09:50:14 ortolojf kernel: PCI: Probing PCI hardware
Dec 21 09:50:14 ortolojf kernel: Linux NET4.0 for Linux 2.2
Dec 21 09:50:14 ortolojf kernel: Based upon Swansea University Computer Society
NET3.039
Dec 21 09:50:14 ortolojf kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0.
Dec 21 09:50:14 ortolojf kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Dec 21 09:50:14 ortolojf kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Dec 21 09:50:14 ortolojf kernel: Initializing RT netlink socket
Dec 21 09:50:14 ortolojf kernel: Starting kswapd v 1.5
Dec 21 09:50:14 ortolojf kernel: Detected PS/2 Mouse Port.
Dec 21 09:50:14 ortolojf kernel: Serial driver version 4.27 with MANY_PORTS MULTIPORT
SHARE_IRQ enabled
Dec 21 09:50:14 ortolojf kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Dec 21 09:50:14 ortolojf kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Dec 21 09:50:14 ortolojf kernel: pty: 256 Unix98 ptys configured
Dec 21 09:50:14 ortolojf kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
Dec 21 09:50:14 ortolojf kernel: Real Time Clock Driver v1.09
Dec 21 09:50:14 ortolojf kernel: RAM disk driver initialized: 16 RAM disks of 4096K
size
Dec 21 09:50:14 ortolojf kernel: PCI_IDE: unknown IDE controller on PCI bus 00 device
78, VID=10b9, DID=5229
Dec 21 09:50:14 ortolojf kernel: PCI_IDE: not 100% native mode: will probe irqs later
Dec 21 09:50:14 ortolojf kernel: PCI_IDE: simplex device: DMA disabled
Dec 21 09:50:14 ortolojf kernel: ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
Dec 21 09:50:14 ortolojf kernel: PCI_IDE: simplex device: DMA disabled
Dec 21 09:50:14 ortolojf kernel: ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
Dec 21 09:50:14 ortolojf kernel: hda: IBM-DAQA-33240, ATA DISK drive
Dec 21 09:50:14 ortolojf kernel: hdb: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
Dec 21 09:50:14 ortolojf kernel: hdc: Goldstar CD-RW CED-8042B, ATAPI CDROM drive
Dec 21 09:50:14 ortolojf kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 21 09:50:14 ortolojf kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 21 09:50:14 ortolojf kernel: hda: IBM-DAQA-33240, 3098MB w/96kB Cache,
CHS=787/128/63
Dec 21 09:50:14 ortolojf kernel: hdc: ATAPI 24X CD-ROM DVD-RAM CD-R/RW drive, 2048kB
Cache
Dec 21 09:50:14 ortolojf kernel: Uniform CDROM driver Revision: 2.54
Dec 21 09:50:14 ortolojf kernel: Floppy drive(s): fd0 is 1.44M
Dec 21 09:50:14 ortolojf kernel: FDC 0 is a post-1991 82077
Dec 21 09:50:14 ortolojf kernel: md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
Dec 21 09:50:14 ortolojf kernel: raid5: measuring checksumming speed
Dec 21 09:50:14 ortolojf kernel: raid5: using high-speed MMX checksum routine
Dec 21 09:50:14 ortolojf kernel: pII_mmx : 716.661 MB/sec
Dec 21 09:50:14 ortolojf kernel: p5_mmx : 640.842 MB/sec
Dec 21 09:50:14 ortolojf kernel: 8regs : 488.823 MB/sec
Dec 21 09:50:14 ortolojf kernel: 32regs : 350.520 MB/sec
Dec 21 09:50:14 ortolojf kernel: using fastest function: pII_mmx (716.661 MB/sec)
Dec 21 09:50:14 ortolojf kernel: scsi : 0 hosts.
Dec 21 09:50:14 ortolojf kernel: scsi : detected total.
Dec 21 09:50:14 ortolojf kernel: md.c: sizeof(mdp_super_t) = 4096
Dec 21 09:50:14 ortolojf kernel: Partition check:
Dec 21 09:50:14 ortolojf kernel: hda: hda1 hda2 < hda5 hda6 >
Dec 21 09:50:14 ortolojf kernel: autodetecting RAID arrays
Dec 21 09:50:14 ortolojf kernel: autorun ...
Dec 21 09:50:14 ortolojf kernel: ... autorun DONE.
Dec 21 09:50:14 ortolojf kernel: VFS: Mounted root (ext2 filesystem) readonly.
Dec 21 09:50:14 ortolojf kernel: Freeing unused kernel memory: 60k freed
Dec 21 09:50:14 ortolojf kernel: Adding Swap: 64476k swap-space (priority -1)
Dec 21 09:50:15 ortolojf atd: atd startup succeeded
Dec 21 10:50:02 ortolojf rc.sysinit: Loading default keymap succeeded
Dec 21 10:50:02 ortolojf rc.sysinit: Setting default font succeeded
Dec 21 10:50:02 ortolojf swapon: swapon: warning: /dev/hda6 has insecure permissions
0660, 0600 suggested
Dec 21 10:50:02 ortolojf rc.sysinit: Activating swap partitions succeeded
Dec 21 10:50:02 ortolojf rc.sysinit: Setting hostname ortolojf.cybercable.fr succeeded
Dec 21 10:50:02 ortolojf fsck: /dev/hda5: clean, 46924/253952 files, 785129/1012000
blocks
Dec 21 10:50:02 ortolojf rc.sysinit: Checking root filesystem succeeded
Dec 21 10:50:02 ortolojf rc.sysinit: Remounting root filesystem in read-write mode
succeeded
Dec 21 10:50:09 ortolojf rc.sysinit: Finding module dependencies succeeded
Dec 21 10:50:09 ortolojf rc.sysinit: Checking filesystems succeeded
Dec 21 10:50:09 ortolojf rc.sysinit: Mounting local filesystems succeeded
Dec 21 10:50:09 ortolojf rc.sysinit: Turning on user and group quotas for local
filesystems succeeded
Dec 21 09:50:11 ortolojf date: Tue Dec 21 09:50:11 CET 1999
Dec 21 09:50:11 ortolojf rc.sysinit: Setting clock : Tue Dec 21 09:50:11 CET 1999
succeeded
Dec 21 09:50:11 ortolojf rc.sysinit: Enabling swap space succeeded
Dec 21 09:50:11 ortolojf init: Entering runlevel: 3
Dec 21 09:50:13 ortolojf network: Bringing up interface lo succeeded
Dec 21 09:50:13 ortolojf network: Bringing up interface eth0 succeeded
Dec 21 09:50:13 ortolojf random: Initializing random number generator succeeded
Dec 21 09:50:16 ortolojf crond: crond startup succeeded
Dec 21 09:50:16 ortolojf lpd: lpd startup succeeded
Dec 21 09:50:17 ortolojf keytable: Loading keymap:
Dec 21 09:50:17 ortolojf keytable: Loading
/usr/lib/kbd/keymaps/i386/azerty/fr-latin1.kmap.gz
Dec 21 09:50:17 ortolojf keytable: Loading system font:
Dec 21 09:50:17 ortolojf rc: Starting keytable succeeded
Dec 21 09:50:18 ortolojf sendmail: sendmail startup succeeded
Dec 21 09:50:18 ortolojf gpm: gpm startup succeeded
Dec 21 09:50:19 ortolojf PAM_pwdb[327]: (su) session opened for user xfs by (uid=0)
Dec 21 09:50:19 ortolojf PAM_pwdb[327]: (su) session closed for user xfs
Dec 21 09:50:19 ortolojf xfs: xfs startup succeeded
Dec 21 09:50:19 ortolojf linuxconf: Linuxconf final setup
Dec 21 09:50:21 ortolojf rc: Starting linuxconf succeeded
Dec 21 09:50:21 ortolojf rc: Starting local succeeded
Dec 21 09:50:29 ortolojf PAM_pwdb[368]: (login) session opened for user root by (uid=0)
Dec 21 09:50:40 ortolojf PAM_pwdb[369]: (login) session opened for user ortolojf by
(uid=0)
My whole question, is: What should I do for getting
the powerdown process behave successfully?
Ooh... Here are some supplementary infos:
- My motherboard is a Gygabyte Super7 Mainboard
GA-5AX (Rev 4)
with an Ali Aladdin V AGPset chipset,
and an Award BIOS dating from June 1999,
( from the BIOS message at boot ).
- It is unlikely that my Ram might be deficient,
for this problem was arising from the beginning.
Thank you for any answer.
Jean Francois Ortolo
--
To unsubscribe:
mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
