Dear John,
The problem is probably that you have to give the kernel (or the module)
the irq and io adress , try to figure that out. then you could have a look
at the archive of beginning of last week as soon as its on the web there
was some diskussion about how to configure a ne2000. it works on kernel
2.0.32 2.0.33 and also in 2.0.34 both compiled into the kernel and as
module.
good luck,
Clemens
-----------------------------------------------------------------------------
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Frankfurt office phone: 069-798-24285
August-Euler-Strasse 6
60486 Frankfurt
On Sat, 6 Jun 1998, John Holman wrote:
> Hi,
> I can't get past the network card driver screen with RedHat 5.1 because
> it won't recognise my ne2000 card (works OK in 4.1)
>
> I just read on deja News that this is because the ne2000 driver won't
> work as a module and is not compiled into the 5.1 kernel.
>
> Can anybody suggest a workaround, other than a new card?
>
> Thanks,
>
> John Holman,
> Melbourne, Australia
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.