Thanks to all. I may have to get a newer card.
Gordon
On Thu, 14 May 1998, Rich Shepard wrote:
> At 08:54 PM 5/14/98 -0500, you wrote:
>
> >I changed the jumper to master, but it still won't recognize my cdrom.
> >When you say second hdc connector, do you mean second from the ide card or
> >second from the end of the cable?
>
> The former. The card probably has two connectors, one is the primary and
> the other is the secondary. Each connector can support two IDE/EIDE
> devices. One device is jumpered as the master, the other as the slave. So,
> a fully loaded system has a primary/master, primary/slave,
> secondary/master, secondary/slave device.
>
> If you had both the hard drive and CD on the primary port (master and
> slave, respectively), the suggestion was to make both masters, but put the
> CD on the end of a separate cable connected to the secondary port on the card.
>
> Rich
>
> Dr. Richard B. Shepard, President
> Applied Ecosystem Services, Inc.
> 2404 SW 22nd Street
> Troutdale, OR 97060-1247 USA
> (503) 667-4517 | (503) 667-8863 - fax
>
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.