Hi all. I bought an Abit TX5 motherboard this weekend with 2
64MB DIMMS. It appeared to work at first, but there were
IRQ conflicts and it didn't see all the memory. I got rid
of the IRQ conflicts that were reported by the BIOS and
was able to boot the original kernel off of the Redhat 5.0
from my initial install but not the one I'd compiled with
the other motherboard in. I recompiled the kernel to include
my Adaptec card support etc. and started to get errors indicating
that the IRQ of the Adaptec card (12) wasn't being accepted -
reported that it might be wrong but it wasn't. While I had it
booted, I added the mem=128M line to lilo.conf (already had the
Adaptec stuff in there), and I haven't been able to boot since.
I get a kernel panic saying that it can't mount root at some
strange numeric address like 22:1b or something like that.
Does anyone have one of these motherboards working. If so, I'll
plug along, trying to iron out the IRQ conflicts (it doesn't see my
mouse on com1 either). If not, it's still under warranty and
returning it is a possibility. Thanks.
--vicki stanfield
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.