Hi, Although not on a rewritable, i have seen this. I got almost the exact error when i tried to write a cd at speed 1 when the media could be written at speeds starting at 2.
On 20 Jan 2003, shawn wrote: > Hello, > > I am trying to back something up to my cd-rw and keep getting errors. > > I tried both via cd-roast and making a iso via the commmand line and > writing via cdrecord (as suggested in the RedHat getting started guide). > > I dk if it makes a diff, but I originally had written a different iso > under windows to the disk and then erased it succussfully under linux. > > Anyway, if the following makes any sence and indicated my problem, I > greatly appreciate letting me know. > > Shawn > > > $ su root -c "cdrecord -v -eject speed=4 dev=1,0,0 webapps.iso" > Password: > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling > TOC Type: 1 = CD-ROM > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Linux sg driver version: 3.1.24 > Using libscg version 'schily-0.5' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'SONY ' > Identifikation : 'CD-RW CRX140E ' > Revision : '1.0n' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Drive buf size : 4183808 = 4085 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 22 MB > Total size: 25 MB (02:31.28) = 11346 sectors > Lout start: 25 MB (02:33/21) = 11346 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 5 > Reference speed: 2 > Is not unrestricted > Is erasable > ATIP start of lead in: -11615 (97:27/10) > ATIP start of lead out: 335925 (74:41/00) > speed low: 0 speed high: 4 > power mult factor: 4 5 > recommended erase/write power: 3 > A2 values: 5C C6 26 > Disk type: Phase change > Manuf. index: 18 > Manufacturer: Plasmon Data systems Ltd. > Trying to clear drive status. > cdrecord: Drive needs to reload the media to return to proper status. > Blocks total: 335925 Blocks current: 335925 Blocks remaining: 324579 > Starting to write CD/DVD at speed 4 in write mode for single session. > Last chance to quit, starting real write in 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > Performing OPC... > cdrecord: Input/output error. read track info: scsi sendcmd: no error > CDB: 52 01 00 00 00 FF 00 00 1C 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 > Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 > (not valid) field ptr 0 > cmd finished after 0.001s timeout 240s > Writing time: 0.024s > Fixating... > cdrecord: Input/output error. close track/session: scsi sendcmd: no > error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.019s timeout 480s > cmd finished after 0.019s timeout 480s > Fixating time: 0.021s > cdrecord: fifo had 64 puts and 0 gets. > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > -- Willem van der Walt Information Services Directorate Department of Health South Africa tel: 27 12 3120700 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list