I think part of my problem is that the set up is so completely different on the AIX box. I checked the file on my secondary box (the Linux box) - it wasn't quite the same, so I made some modifications. It doesn't seem to have made a difference.

Could the IP forwarding setting on the primary box have anything to do with it?


Cowles, Steve wrote:
-----Original Message-----
From: Dana Holland
Sent: Friday, March 21, 2003 3:53 PM
Subject: DNS problems


I'm having trouble getting secondary DNS working on my RH 8.0 box. This is my first attempt at using a Linux box for DNS -
in the past I've always worked with AIX. The primary DNS
server is on AIX currently.


Below is the output for the dig commands - dns... is the primary server, while dns2... is the secondary server.
My ISP has told me that the ANSWER section needs to match -
and it doesn't.



Your ISP is correct. Based on your query to dns2, it looks like it is NOT pulling the primaries zones. i.e. configured as a slave zone.

Double check your zone definition on dns2 and also insure that your primary
is configured to ALLOW dns2 to pull these zones. i.e. the "allow-transfer"
directive.

Example:

On my primary 192.168.9.2... slave's ip is 192.168.8.2

        # Load the internal mydomain.com zone as master
        zone "mydomain.com" in {
                type master;
                notify yes;
                allow-update { key dhcp_updater; };
                allow-transfer { 192.168.8.2; };
                file "int/db.mydomain";
        };

        # Load the internal 192.168.9.0/24 reverse zone
        zone "9.168.192.in-addr.arpa" in {
                type master;
                notify yes;
                allow-update { key dhcp_updater; };
                allow-transfer { 192.168.8.2; };
                file "int/db.192.168.9";
        };

On my secondary name server...

        # Load the internal mydomain.com zone as slave
        zone "mydomain.com" in {
                type slave;
                file "int/db.mydomain";
                masters { 192.168.9.2; } ;
        };

        # Load the internal 192.168.9.0/24 reverse zone as slave
        zone "9.168.192.in-addr.arpa" in {
                type slave;
                file "int/db.192.168.9";
                masters { 192.168.9.2; } ;
        };

Steve Cowles





--
************************************************************
Dana Holland    [EMAIL PROTECTED] 903-875-7355
Navarro College    Corsicana, TX
http://www.navarrocollege.edu/staff_pages/dana/dana.html
************************************************************
All opinions stated are my own, and probably don't even
vaguely resemble those of Navarro College.  :)



--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to